Product Categories

Tension products

Beijing Oulihua Technology Development Co., Ltd

E-mail
Phone
Address
Room 333, Building B, Lianxin International Building, Balizhuang Science and Technology Park, Chaoyang District, Beijing

Contact Now

Hohenzollern tension sensor

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The axial sensor RFS 100, which measures radial tension using the Hornischmann tension sensor, can measure tension up to 100N online. The online tension can be accurately measured; #183; Use existing tension measurement points $r $n #183; Widely applicable and suitable for various working conditions; #183; Small and exquisite size, independent force introduction point $r $n #183; Easy installation and maintenance; #183; Sturdy stainless steel casing $r $n #183; 11 range options: 0 to 2N... 0 to 100N

Product Details

Hohenzollern tension sensor

The RFS 100 axial sensor for measuring radial tension can measure tension up to 100N online

Accurate online tension measurement,

·Use existing tension measurement points

·Widely applicable and adaptable to various working conditions

·Compact and exquisite in size, with independent force introduction points

·Easy to install

·Durable stainless steel casing

·11 range options: 0 to 2N... 0 to 100N

Description

RFS100 is capable of maintaining persistent and precise measurements, while the calibration accuracy of specified materials remains unchanged

·The introduction point without force and the action of the shaft lever can detect any possible axial tilting moment

·Not affected by any possible axial tilt torque

·Functional principleFor high-precisionThe principle of strain bridge of degree greatly improves product performance. This measurement principle enables the sensor to have high sensitivity and excellent performance. The force acting radially on the bearing can produce small changes along the measured vector direction, causing physical deformation of the load unit. This variable is first compared with the corresponding point of the pre-set recorded deformation standard and converted into the corresponding electrical signal value

·This tension measurement principle is based on the action of radially applied force, which is transferred to the bearing of the sensor. This force is determined by the torque geometry and the magnitude of the tension exerted by the line

Measurement amplifier:

TS 621

• Used for standard tension sensors

• Optional power supply

DC 24V power supply is required

• Current isolation

TSA 723

Compact and sturdy aluminum alloy casing for standard tension sensors

• Low consumption

Standard 0-10V

24V DC power supply

Design for standard tension sensors

Single channel operational amplifier

• Digital/analog display

Desktop shell

TS 503