uElectromagnetic compatibility meets《EN 50121-3-2The provisions of "2006";

uCAN complies with the latest standard of ISO11898-1.

1. Product appearance

The appearance is shown in the following figure:

2. Shell size

3. Interface description

have1 Bluetooth antenna,1roadCANinterface1Road power supplyInterface. The interface pins are defined as follows

3.1 Definition of Terminal Interface Pins

The port is standardOPEN5 terminalIt adopts a three wire connection,as shown in the following table

Definition of terminal interface pins

Note:

（1）Users using CANWhen connecting the bus, a 120 ohm terminal resistor needs to be connected at the terminal. This product does not have terminal resistors inside.

（2）Configure the serial port to use RS232The interface is cross connected with the computer. The Tx of the product232Connect to computerDB9Two feet,Rx232Connect to computer DB9of3Feet, GNDConnect to computer DB9Five feet;

（3）The power supply should preferably be higher than 12V2ATo prevent power outages caused by insufficient power supply.

（4）The power supply has anti reverse connection function.

3.2 Reset Interface

Used for device reset and restart. Under normal circumstances, no operation is required.

Reset connection口

3.3 Antenna interface

This product has1An antenna interface, ANT1For Bluetooth antenna.

Definition of antenna interface

4. Indicator light description

On the converter4aLEDAll are used to indicate functions as shown in the table below.

Definition of indicator lights

1. Product model

Product Features

uWireless standard: Bluetooth5.0（Bluetooth^®5.0,ANT），AES HW EncryptionSafety function;

uBluetooth frequency:2400MHz---2483.5MHz，GFSK ModulationModulation technology;

uBluetooth transmission rate:Uncoded:1Mbps/2Mbps,Coded:125kbps(S=8)/500kbps(S=2)；

uBluetooth working mode:Central/PeripheralThe Bluetooth main station supports being9Substation connection;

uBluetoothMACThe address is globally unique;

uBluetooth transmission power:-20 ~+4 dBmConfigurable;

uBluetooth supports name connectionMACConnection and maximum signal strength connection;

uintegration1roadCAN2.0BInterface, compatibleCAN2.0A, in accordance withISO11898-1Standard;

uCANBaud rate supports high speed40K~1MbpsThe default baud rate is250Kbps；

uCANInterface electrical isolation:DC 2500VorAC 1700V；

uCANInterface adopts standardOPENTerminal;

uprovide1roadRS232As a parameter configuration port, the baud rate is fixed at115200bps；

uThe main power supply adopts9-36VWide voltage DC isolated power supply, isolated withstand voltage1500VDC；

uOperating Temperature-40℃～+85℃

ustorageTemperature:-40℃～+85℃

uMaximum relative humidity:90%