Product Categories

Guangzhou Zhongzhicheng Information Technology Co., Ltd

E-mail
gzzzc@zzccom.com
Phone
15323368276
Address
154 Heguang Road, Tianhe District, Guangzhou City, Guangdong Province

Ethernet TRDP-CAN&232 gateway

NegotiableUpdate on 12/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TRDP-CANRS485_232 series is an Ethernet TRDP (TSN) to CAN or RS485/232 series protocol conversion module produced by Guangzhou Zhongzhi Cheng Information Technology Co., Ltd. The Ethernet M12 interface can be converted to CAN or RS232. Ethernet is an M12 interface with 100Mbps/1000Mbps. CAN defaults to 250Kbps. RS232 defaults to 115200 baud rate. Other baud rate requirements require customized services.

Product Details

uElectromagnetic compatibility meets《EN 50121-3-2：2006》The regulations;

uEthernet meets the requirements《IEC61375-2-3：2015》And《IEC61375-3-4：2014》Standard;

uCANcomply with《ISO11898-1How to translateAnd《

IEC61375-3-3

图片6.png

图片3.png

图片4.png

》Latest standards.1.1 1. Product appearance

图片8.png

image

product appearance2. Interface description1-2haveTwo redundant Ethernet networks,roadCAN/RS232/1RS485interface

2.1 Road power supplyInterface. The interface pins are defined as follows.CAN/RS232

/485Definition of interface pinsThe port is standardOPEN5terminal

图片9.png

It adopts a three wire connection,As shown in the table below:Figure 2.1.1CAN

/RS232/485120Interface pin configurationAttention: Built inEuropean terminal resistor, enabled by external dip switch,asCAN120When using a network terminal,Need to enable

2.2 Ohmic resistance

.Ethernet interfaceEthernet adoptsdouble“D”Type codeofM12Connector,M12The connector has a metal shielding shell. The device end adopts hole type connectors, each

图片10.png

M122The definition of connector points is as follows: image.2.1

2.3 Ethernet

Definition of interface pins9power interfaceThe power supply adopts

图片11.png

-36V2The wide compression function is defined as follows: image.3.1

power supply

Definition of interface pins43. Indicator light descriptionOn the converteraLED2.1Used to indicate functions such as

table3.1As shown.

图片12.png

table

Indicator light fixed

1. Product model2. Product featuresudual-pathcompulsory100Mor1000MFull duplex Ethernet interface,2KVElectromagnetic isolation, default configuration is

MDIpattern;uhundred megabitsEthernet adopts“D”Type codedM12connector,M12Connector;Gigabit adoption“

X”Type connector.uThe Ethernet working mode can be selected asTCP ServerTheTCP ClientTheUDPandUDPMulticast, working port, target

IP2Both ports can be set;uroadM12All interfaces are supported

IEEE 802.1 TSNSupport hardware timestamps to ensure accurate clock synchronization;uEthernetThe agreement complies withIEC61375-2-3andIEC61375-3-4Request, supportTRDPagreement; supportIEEE802.1 (including802.1AS-RevThe802.1QbvThe802.1Qbu

The802.1CB)uThe Ethernet application layer protocol complies withIEC61375-2-3andIEC61375-3-4Request, support

TRDPagreement;uEthernet supports static or dynamic

IPobtain;uMACThe address is globally unique,

Or configurable；uEthernet supportTCN-DNSand

TTDB；u2integration1/roadCAN2.0BInterface, compatibleCAN2.0A, in accordance with

ISO11898-1Standard;uCANBaud rate supports high speed40K~1MbpsThe default baud rate is

250Kbps；uCANInterface electrical isolation:DC 2500Vor

AC 1700V；uCANInterface adopts standardCANOpenInterface, compliant

IEC61375-3-3Standard;1u3integrationroadLine typeRS-232communication1interface2orroad485Line typeRS-communication115200interfaceThe default communication rate is

bpsOther baud rate requirements can be customized;uRS232/485circuitadoptDC2500Velectricity

qiIsolation;uThe main power supply adopts9-36VWide voltage DC isolated power supply, isolated withstand voltage

1500VDC；uOperating Temperature-40℃

～+85℃ustorageTemperature:-40℃

～+85℃u