uElectromagnetic compatibility meets《EN 50121-3-2The provisions of "2006";

uCAN complies with the latest standard of ISO11898-1.

1. Product appearance

The appearance is shown in the following figure:

2. Shell size

3. Interface description

have1 Bluetooth antenna,1roadCANinterface1Road power supplyInterface. The interface pins are defined as follows

3.1 Definition of Terminal Interface Pins

The port is standardOPEN5 terminalIt adopts a three wire connection,as shown in the following table

Definition of terminal interface pins

Note:

（1）Users using CANWhen connecting the bus, a 120 ohm terminal resistor needs to be connected at the terminal. This product does not have terminal resistors inside.

（2）Configure the serial port to use RS232The interface is cross connected with the computer. The Tx of the product232Connect to computerDB9Two feet,Rx232Connect to computer DB9of3Feet, GNDConnect to computer DB9Five feet;

（3）The power supply should preferably be higher than 12V2ATo prevent power outages caused by insufficient power supply.

（4）The power supply has anti reverse connection function.

3.2 Reset Interface

Used for device reset and restart. Under normal circumstances, no operation is required.

Reset connection口

3.3 Antenna interface

This product has1An antenna interface, ANT1For Bluetooth antenna.

Definition of antenna interface

4. Indicator light description

On the converter4aLEDAll are used to indicate functions as shown in the table below.

Definition of indicator lights