High pressure fan for fruit and vegetable bubble cleaning machine

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The main function of the high-pressure fan dedicated to fruit and vegetable bubble cleaning machine is to generate bubbles, which clean the dirt and oil on the surface of fruits and vegetables through the impact of bubbles and high-pressure water flow. Specifically, the high-pressure vortex fan inputs air into the bottom of the water tank in the equipment box, forming bubbles. These bubbles combine with the water flow, causing the raw materials to roll during the cleaning process, thereby achieving better cleaning results.

Product Details

High pressure fan for fruit and vegetable bubble cleaning machineUsing a high-speed rotating impeller to suck in gas, the gas is accelerated to high speed by centrifugal force, and high pressure is formed in the pressure vessel. This high-pressure airflow forms bubbles in water, and the energy generated when the bubbles burst impacts and brushes the surface of fruits and vegetables, effectively removing dirt and impurities from the surface.

High pressure fan for fruit and vegetable bubble cleaning machineFeatures:

1. It has dual functionality, with the same product having both suction and blowing functions. And it can also use both suction and blowing functions simultaneously.

2. It adopts oil-free operation, which can make the air output by the blower cleaner and purer.

3. High pressure, large air volume, low noise, and lightweight machine. The gap between the rotors of the high-pressure blower and between the rotors and the machine body is small. Greatly increased the pressure of the wind.

4. Adopting a special blade design, its blade manufacturing has high precision, wear resistance, strong wind force, and long service life.

5. Reliable quality, capable of working normally in environments above an altitude of 5000, resistant to high temperatures and severe cold.

6. Maintenance free use, within the warranty period, basically no maintenance is required.

Operation and maintenance:

After installation, the blower should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

2. During the operation of the fan, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperature, excessive motor current, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

3. After 5000 hours of use, the bearing grease of the fresh air fan should be replaced.

4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

5. During the shutdown period of the fan, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan cavity and causing accidents.

6. The fan needs to be inspected every six months to remove dust and oil stains from the fan flow channel.