High pressure blower for color selection machine matching application

High pressure blower for color selection machine matching applicationThe shell is die cast as a whole and uses shockproof mounting feet, so its requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles; The fan blades that generate centrifugal force are made of double-sided forward leaning multi blade, molded in one go, with high-quality dynamic balance, extremely low vibration, stable wind force, low noise, and can withstand certain frictional impact forces, with a long service life.

High pressure blower for color selection machine matching applicationThe core principle is based on gas compression and energy conversion technology, mainly used for gas flow control in material separation processes. The following are the specific principles and applications:

Gas compression and directional transportation

A high-pressure blower generates centrifugal force through the rotation of an impeller or rotor, compressing gas and conveying it in a specific direction. For example, a centrifugal blower obtains kinetic energy from the gas through high-speed rotation of the impeller, and then converts the kinetic energy into pressure energy through the volute structure, achieving directional delivery of high-pressure airflow. ‌

Energy Conversion and Pressure Regulation

The high-pressure blower in the color sorter can convert electrical energy into high-pressure gas energy (pressure can reach 0.1-1.5 kgf/cm ²). For example, a certain model of centrifugal blower can generate a wind pressure of 10kPa at a speed of 2900rpm, and optimize the efficiency to over 85% through the theory of ternary flow. ‌

Special structural design

The high-pressure vortex fan enhances the gas acceleration effect through a multi blade design, allowing the airflow to be efficiently output in a spiral form. The pressure can reach 12-17 times that of a centrifugal fan at the same speed. This structure can achieve more precise material separation control in color sorting machines. ‌

Cross industry application adaptation

High pressure blowers replace traditional wind equipment in color sorting machines. By optimizing flow and pressure parameters, they can meet the high requirements of sorting systems for airflow stability and pressure uniformity, and are suitable for scenarios such as grain screening and mineral sorting.

Precautions for use

No matter which brand of high-pressure fan it is, two aspects of protection are needed: pressure and dust.

For pressure, a pressure relief valve is often used, which is an unloading valve. When the operating pressure of the high-pressure blower exceeds the set pressure of the pressure relief valve, the pressure relief valve will automatically open, releasing the excess pressure and protecting the vortex air pump.

For dust, filters are often used. It often uses filter cartridges with different filtration accuracies according to different usage scenarios. Different filter cartridges have different maintenance methods and service lives, which need to be clarified when ordering.

In some special occasions, special protection is also necessary: for example, when using in a sealed environment, attention should be paid to ventilation and heat dissipation; When the ambient temperature (intake temperature is relatively high), it is more important to pay attention to ventilation and heat dissipation, or choose a vortex air pump that allows for a higher intake temperature.

Our company's service and usage precautions are as follows:

1. Provide customers with detailed technical parameters to avoid selection errors

2. The entire series of products are uniformly guaranteed for 12-18 months.

3. Each product comes with a detailed operating manual, allowing users to use the product faster and better according to the manual.

A、 Before use, it is necessary to carefully check whether the voltage and frequency indicated on the product nameplate meet local requirements, and strictly operate according to the rated voltage of the motor

B、 It should not be used in areas where water is easily sprayed or directly exposed to rain

C、 When the explosion-proof blower is running, the current consumed by the motor will increase with the increase of pressure and vacuum degree. If the current is too high, it will conduct