High power automatic suction machine

Naming principle

OAL- xxx - xx

① ② ③

① Oshide automatic suction machine

② Motor power

③ Note:

P: Paired with photoelectric hopper

Product Features

1. The OAL series direct suction machine adopts a carbon brush motor with high speed and large air volume

2. Small footprint and easy installation

3. Wire controlled controller, easy to use, and optional automatic cleaning function

4. The hopper and base can be adjusted in multiple directions

5. Using micro switches, with sensitive sensing and stable quality

6. Equipped with a handle hopper cover for easy cleaning of filter screens and material replacement

7. Multiple security protection functions, such as shortage alarm

8. Completely avoid the trouble and danger of manual feeding, save labor, and improve work efficiency

Select accessories

Aggregate hopper OCH-6/12/24, divided into standard and insulation types, two material ratio valve, automatic cleaning function of pressure storage tank, alarm

Scope of application

working principle

The control device starts the vacuum motor to extract air from the hopper, while closing the discharge valve device to create negative pressure inside the hopper. Under negative pressure, external materials are carried into the hopper by the airflow through the conveying pipe. At the end of the feeding time, the vacuum motor stops working, and the internal feeding valve device valve is pushed open by the raw material. The material flows out of the hopper and enters the forming machine or other equipment.

Technical Specifications

Product parameters are subject to change without prior notice.

Note:

(1) The hopper capacity is calculated based on plastic raw materials with a bulk density of 0.65kg/L and a diameter of 3-5mm

(2) Machine voltage specification: 1 ф, 230VAC, 50Hz