High and low temperature test box for automotive parts testing equipment

High and low temperature test chamberMain technical parameters:

(1) Temperature range: -60 ℃ to+150 ℃;

(2) Temperature fluctuation: ≤± 0.5 ℃;

(3) Temperature uniformity: ≤± 2 ℃;

(4) Temperature deviation: ≤± 2 ℃;

(5) Heating time: 3-4 ℃/min (customizable)

(6) Cooling time: 1 ℃/min (customizable)

(7) Cooling method: air-cooled or water-cooled

(8) Product model

(9) Inner box material: 304 stainless steel

(10) Outer box material: stainless steel plate baked paint or stainless steel

(11) Engine: a first-line product in the market

(12) Protection devices: no fuse switch, compressor overpressure, overheating protection, overcurrent protection, overtemperature protection, overload protection, dry burning protection, water shortage protection, etc

Product Features:

Good stability: constant temperature fluctuation less than ± 0.5 ℃;

Ultra wide measurement temperature range: ultra-low temperature test can reach -185 ℃, ultra-high temperature test can reach 500 ℃;

High temperature conversion efficiency: The temperature conversion rate can achieve 3 ℃/min, 5 ℃/min, 10 ℃/min, 15 ℃/min, 20 ℃/min, and 25 ℃/min, with an average throughout the entire process;

Fast response speed and smooth operation: The operation speed is fast, and the temperature and humidity reach the set points in a parallel and stable manner, without overshoot or shaking phenomenon (reaching fluctuation<0.5 ℃);

High intelligence: Smooth human-computer interaction, rapid response, and intelligent export of experimental data.

High and low temperature test chamberTemperature range:

The temperature range of the high and low temperature test chamber B series is -20 ℃ to+180 ℃

The temperature range of the C series is -40 ℃ to+180 ℃

The temperature range of the D series is -60 ℃ to+180 ℃

The temperature range of the E series is -85 ℃ to+180 ℃

Non universal standard sizes or other special temperature requirements can be customized.

Testing standards:

According to the quality supervision and testing of national environmental testing equipment, it meets the following standards in the "Technical Conditions for Environmental Testing Equipment" series:

GB/T 2423.1-2008 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test A: Low Temperature GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test B: High Temperature

GB/T 2423.3-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Cab: Constant Damp Heat

GB/T 2423.4-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Db: Alternating Damp Heat (12h+12h Cycle)

GB/T 2423.22-2002 Environmental testing for electrical and electronic products - Part 2: Test methods - Test N: Temperature changes

GB/T 2423.34-2005 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Z/AD: Temperature/Humidity Combined Cycle Test

GB/T 2423.50-1999 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Cy: Constant Damp Heat Mainly Used for Accelerating Components

GB/T 10586-2006 Technical Conditions for Damp Heat Test Chamber

GB/T 10589-2008 Technical Conditions for Low Temperature Test Chamber

GB/T 10592-2008 Technical Conditions for High and Low Temperature Test Chambers

GB/T 11158-2008 Technical Conditions for High Temperature Test Chamber