- Phone
-
Address
No. 44 Tongkai Road, Jinshan District, Shanghai
Product Categories
Shanghai Lianyi Instrument Co., Ltd
Handle type rapid temperature probe, thermocouple, thermistor
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The handle type rapid temperature probe thermocouple thermistor tightly adheres the thermocouple end to the surface of the measured object to improve the reliability and accuracy of the measurement. It is used in conjunction with display instruments and can directly measure temperatures within the range of 0-400 ℃.
Product Details
Handle type rapid temperature probe, thermocouple, and thermistor product overview:
The working principle, division characteristics, and allowable deviation of thermocouples, temperature compensation at the reference end (cold junction), and connection method with display measuring instruments are all the same as those of general thermocouples.
Installation method of thermocouple: It is fixedly installed on the measured object. First, tighten the connecting bolts on the measured object, then tightly attach the thermocouple to the measured object, tighten the sleeve screws, and finally tighten the locking sleeve.
Handle type rapid temperature probe, thermocouple, thermistorModel and specifications:
Model |
graduation mark |
Measurement range ℃ |
Thermal response time t0.5 |
Protective tube material |
|
|
WRET-01 WRNT-01 |
E（EA-2） ﹡ K |
0~400 0~600 |
＜5 |
stainless steel 1Cr18Ni9T |
|
specification |
Connecting bolt L2mm |
||||
Total length Lmm |
Protective tube L mm |
||||
|
1000 1500 2000 2500 3000 3500 4000 |
30 30 30 30 30 30 30 |
35 or 70 |
|||
|
1000 1500 2000 2500 3000 3500 4000 |
60 60 60 60 60 60 60 |
||||
Note: Ordering must include 1) product name and model
The working principle, division characteristics and allowable deviation, temperature compensation of the reference end (cold junction), and connection method with the display measuring instrument of the compression spring thermocouple are all the same as those of general thermocouples.
Installation method of thermocouple: It is fixedly installed on the measured object. First, tighten the connecting bolts on the measured object, then tightly attach the thermocouple to the measured object, tighten the sleeve screws, and finally tighten the locking sleeve.
2) Total length and placement depth (L × 12 × 12)
3) The division mark marked with "*" indicates special specification ordering.
Similar Product Recommend
