HL-M-200W Mold Laser Welding Machine with Handheld Energy Dispersive Welding Machine

Principle of laser welding mold repair:
The Hailei mold laser welding machine generates high heat energy reduction in the instant of pain, and uses specialized welding wire to fuse to the damaged position of the mold, firmly fusing with the original substrateAfter welding, it is processed into a smooth surface through electrical discharge, grinding, etc., in order to repair the mold.

Product advantages:
1. Brand new design, high-end appearance
2. The laser head can move up and down, forward and backward, left and right, and can automatically move up and down and left and right, which is suitable for large molds and greatly improves operability.
3. The laser light path and power control system are independently designed, making it easy to move and suitable for repairing various molds in various fields.
4. Enhanced automatic precision worktable, with optional up and down electric control and stepless speed regulation. The horizontal direction of the workbench adopts ball screws and is weldedWhen using large molds, the worktable can be easily moved and has high precision and stability.
5. The laser control precisely controls the waveform of the laser power supply, and the system pre sets optimized waveform values for different materials. Just choose the corresponding oneThe material can produce the best welding effect.
6. The heat affected area is small, which will not cause deformation of precision instruments. The welding depth is large, the welding is firm, the melting is sufficient, and there are no repair marks leftThere is no protrusion or depression at the joint between the molten pool and the substrate.

Observation system:
Equipped with a dedicated microscope observation system with a crosshair, with a magnification of 17.5X. The center of the crosshair is aligned with the center of the laser spot (user)Adjustable). Equipped with a high-speed electronic filter protection device, it protects the operator's eyes from laser damage, relieves eye fatigue, and improvesHigh work efficiency.

Control system:
Adopting an improved built-in microcontroller for dual closed-loop precision control. Its stability and operational capability are far superior to the small microcomputers used in similar productsAdd control card.

Gas protection system:
Change to a dual channel synchronous argon gas protection system, which provides better argon gas protection, stronger welding effect, and more beautiful appearance. At the same time, it maintains its original advantages - synchronous control with laser emission, which can maximize the savings of argon gas.

Installation conditions and consumables:
220V 50HZ AC, providing a current of over 30 amps (6 square meters of wire) and stable voltage.
Environment: Clean and dust-free or with minimal dust, temperature: 55 ° F (13 ℃) to 82 ° F (28 ℃), humidity: 5% to 75% without condensation.

Main consumables:

Xenon lamp, filter element, protective lens, water, welding wire, argon gas, electricity

Supporting equipment:
Chiller, reinforced workbench, laser welding wire, welding wire clamp
application area
Widely used for mold repair services and mechanical parts repair, can repair and weld various mold materials: S136、NAK80、718、738、P20、SKD-11、SKD-61、H13、W302、GS2344、GS2343、GS2080 Waiting for mold steel from various countries. There will be no cracks or sand holes after welding. The hardness after welding can reach HRC60 ° hardness.

performance parameter
Model: Mold Welding Machine HL-M-200W
Maximum laser power (W) 200W
Laser wavelength (um) 1.064
The maximum energy of a single pulse is 90J
Laser welding frequency (HZ) 0.5-40
Laser welding depth (mm) 0.1-3.5
Pulse width (ms) 0.5-20
Spot size (mm) 0.2-2
Laser welding wire (mm) 0.2-0.8
Enhanced automatic workbench with optional electric workbench
The overall power of the machine is less than 11KW
Power requirement: single-phase 220, 15% VAC, 50Hz, above 40A