HJ-6A six link digital display constant temperature magnetic stirrer

1、 Product Introduction

HJ-6A six link digital display constant temperature magnetic stirrerBy using high-quality DC motors and adding digital temperature control function on the basis of ordinary magnetic heating stirrers, the temperature can be set and kept constant. It is easy to operate, has low noise, runs smoothly, and has stepless speed regulation. It can accurately and stably stir liquids in a wide speed range, especially suitable for stirring small volume samples. It is a high-quality tool for petroleum, chemical, pharmaceutical and health, environmental protection, biochemical laboratories, analysis rooms, education and scientific research. The agitator made of refined polytetrafluoroethylene and high-quality magnetic steel is resistant to high temperature, wear, chemical corrosion, and strong magnetism. It can be mixed in a closed container and is very ideal and convenient to use.

IIHJ-6A Six JointDigital display constant temperatureMagnetic StirrerThe main characteristics of

1On the basis of a regular magnetic heating stirrer, a digital temperature control function is added,Realize temperature adjustable and constant function.

2. The stirring speed and heating temperature can be continuously adjusted, making it widely applicable for stirring solvents of different viscosities.

3. Using aluminum alloy heating plates, it has both good thermal conductivity and strong resistance to cold, heat, and corrosion.

4. The bottom of the heating plate adopts a dual melting device, which can fully improve efficiency and avoid heat conduction to the casing.

5. The overall molded casing and its convex surface design on the upper part can effectively prevent the solution accidentally overflowing during the stirring process from flowing into the mixer and damaging electronic components.

3、 Main parameters

1. Power supply: 220V 50Hz

2. Motor power: 25W × 6

3. Heating power: 200W × 6

4. Temperature control range: Room temperature~100 ℃

5. Speed range: 0~2400 revolutions per minute, stepless speed regulation (synchronous)

6. Working size: Φ 125mm

7. Timing range: 0-120min (or normally open)

8Maximum mixing capacity: 1000ml × 6

4、 Usage method

When using, first check if the accessories of the whole machine are complete, then install the fixtures in order, place the beaker that needs to be stirred in the center of the work panel, add the solution, and place the stirrer in the beaker solution. Then plug in the power plug of the instrument first, turn on the power supply, turn on the power speed control switch, the indicator light will turn on, and start working. The speed control is gradually adjusted from low speed to high speed, and it is not allowed to start directly at high speed to avoid the stirrer not being synchronized and causing jumping. When not working, the power should be cut off. To ensure safety, please connect the ground wire when using. The instrument should be kept clean and dry, and it is strictly prohibited for solution to enter the machine to avoid damaging the parts and prevent severe vibration.

5、 Usage and maintenance

1. Place the test bottle (or other vessel) containing the solution and stirrer on the work panel.
2. Connect the power supply, turn on the power switch, and the indicator light will turn on.

3. Set the required temperature according to the temperature control instrument manual to use the heating and constant temperature function.

4. Adjust the speed control knob to the desired speed.

5. After finishing the work, place the speed control knob in the smallest position, the heating switch is in a non working state, turn off the power switch, and cut off the power.

6. Wipe the top plate of the workbench clean, and there should be no water droplets or dirt residue on it.

6、 Precautions

1. When stirring, if the stirrer is jumping or not stirring, check if the beaker is stable and the position is correct.

2. Medium speed operation can extend the service life.

3. Please connect the ground wire when using.