HID controller

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The HID 5352AGN00 controller is a specific model of the ProxPro 5352 series non-contact access card reader produced by HID Global in the United States, mainly used for "card swiping and door opening" security systems.

Product Details

The controller HID 5352AGN00 is produced by HID Global in the United StatesProxPro 5352A specific model of the series of contactless access control readers (Proximity Access Control Reader), mainly used for "card swiping and door opening" security systems. Based on multiple spare parts and product catalog information, its core features are as follows:

functional positioning
125 kHz low-frequency RFID card reader, read-only HID original induction card (ProxCard II, KeyTag, etc.), does not support card writing or logical encryption. A typical application is to output the serial number of the card/keychain in Wiegand or serial (RS-232) format to the access control controller for identity recognition.
Electrical/Interface

Power supply: DC 5-16 V, typical operating current<100 mA
Output: Standard 26 bit Wiegand (default), switchable to Clock and Data or RS-232 serial port 9600 bps via jumper/command
Reading distance: about 7-10 cm for regular ProxCard II and about 4 cm for KeyTag
Transmission line: Red (+), Black (-), Green/White (Data0/Data1) four core shielded wire, up to 150 meters long (Wiegand)

Structure and Installation

NEMA 4X/IP65 polycarbonate casing, gray (Color: Gray), suitable for direct outdoor use
86 × 86 × 20 mm size, American standard single gang or surface anti disassembly box installation; Equipped with tamper proof switch on the back
Working temperature -30 ℃~+65 ℃, resistant to UV, salt spray, dust, suitable for harsh environments such as industrial/dock/parking lot, etc

Meaning of model suffix (AGN00)

A=No Keypad
G=Gray shell
N00=No ticket box/No special packaging code, industrial channel version

Typical application scenarios

Access points for factories, warehouses, computer rooms, and laboratories
Elevator floor control, attendance/dining card swiping terminal
Seamless integration with HID VertX/Edge or third-party controllers (Bosch, Honeywell, ZKTec, etc.)

Compatible card
HID ProxCard II, ISOProx II, DuoProx II, KeyTag, MicroProx Tag, and other 125 kHz induction cards must have card number formats consistent with the controller (26 bit, 37 bit, etc.).
Ordering and Replacement
5352AGN00 can be ordered directly through most industrial e-commerce or access control channels; If the old card reader is damaged, you can directly plug and unplug the same cable sequence to complete the "zero configuration" replacement without the need to reissue the card.