HDGC3980J Intelligent AC False Load Tester

HDGC3980J Intelligent AC False Load Tester

HDGC3980J Intelligent AC False Load TesterIt can accurately test the output power, load capacity, other performance indicators, and electrical parameters of various diesel generator sets, UPS and other equipment. It can visually display and automatically save the test data of important parameters. The randomly equipped analysis management software can record various data changes throughout the testing process and automatically generate test reports.

Product Features

1. Equipped with a USB interface and a dedicated data USB flash drive, it can record and store the high-speed collected voltage, current values, and transient voltage waveforms during the discharge process on the USB flash drive, and import them into a PC. PC data management software can analyze the process of battery discharge and generate corresponding data reports.

2. Large screen touch screen display, touch based operation, convenient, intuitive, displaying data on one screen.

3. Single machine to high power 0~100KW continuously adjustable, and higher power can be operated in parallel.

4. The three-phase current can be set freely between 0 and 160A, and the equipment can operate under conditions of three-phase power imbalance.

5. AC and DC load function, dual-use: capable of automatically identifying both AC and DC voltages, can be used as both AC and DC loads, and meets the requirements for discharging UPS battery packs.

6. The load time can be set according to customer requirements, continuously adjustable from 0 to 99 hours, and adjusted in minutes.

7. Adopting intelligent microcontroller ARM control and LCD Chinese display.

8. You can set different current, stop time, discharge power, and voltage thresholds (both upper and lower limits can be used for the device).

9. There is an E-STOP emergency stop switch.

10. The three-phase voltage is too high, and the system automatically stops discharging.

11. The three-phase voltage is too low, and the system automatically stops discharging.

12. It has overcurrent and short-circuit protection function.

13. Any fan that experiences an open circuit, power failure, or malfunction will sound an alarm and the load will automatically trip and disconnect the power supply.

14. The main power consuming device adopts PTC ceramic resistors, which have no red heating phenomenon and will not cause overheating and ignition accidents.

Product features

1、 Load function

It can serve as an intelligent load for communication devices and can be discharged under different conditions such as current and stop time.

2、 Testing function

It can measure the active power, reactive power, apparent power, active energy, and reactive energy of each phase and phase of the tested power supply. At the same time, it can also measure the load capacity of the power supply such as phase current, voltage effective value, power factor, phase angle, frequency, etc. Has powerful wireless capabilities.

3、 Management function

A powerful computer management system will record and analyze test data, forming detailed and complete reports.

Product Parameters