Glass bottle pressure tester

BLP-10Glass bottle pressure tester

Instrument Introduction:

Glass bottle pressure tester according to national standardsProduct BasisGB/T4546-2008According to the standard for testing the internal pressure resistance of glass containers, the experimental items require fully automatic display of pressure changes throughout the entire experimental process, which can meet the requirements of various capacity glass holding pressure tests and burst pressure tests. It is a testing instrument for various quality inspection agencies and beverage production enterprises.

Testing method:

methodAA test that applies uniform internal pressure within a predetermined time and maintains it uniformly60A bottle that does not break in seconds is considered qualified. And the incremental experiment of gradually increasing pressure.

methodBTest of increasing internal pressure at a predetermined constant rate,Pr=1.38P60+0.1783Increase the pressure toPrIf the pressure is not maintained, immediately release the pressure and the bottle does not break, it is considered qualified! If the sample bottle ruptures midway, record the peak value of the maximum destructive force that the bottle can withstand.

1. Instrument working environment

1.1 power supply220V，50Hz

1.2Ambient temperature15℃～50℃

1.3Relative humidity: highest80%,no condensation

2.performance metrics

2.1Touch LCD screen, equipped with a micro printer to quickly print experimental results, meeting the requirementsGB4546-2008test standard

2.2Equipped with automatic water addition function, saving personnel workload

2.3Can conduct constant pressure holding test, boost pressure non holding test, and rupture test

2.4Equipped with a micro printer,Quickly print experimental results

2.5User hierarchical permission management function ensures data integrity and standardization

2.6The system program hasISPOnline upgrade function, providing personalized services

2.7Measurement range:0～8 MPa

2.8Measurement accuracy: ±1%

2.9Water addition method: automatic

2.10Experimental mode:Apass, through, viaAIncrementalBpass, through, viaBdestroy

2.11 The pictures are for reference only and are subject to factory inspection.

2.12 Factory verification by the manufacturer

3Configuration List

3.1host1platform

3.2 One set of testing software

3.3Test mold (minimum diameter)14.5mm, the largest52.9mm）1set

3.4A set of universal fixtures

3.5 8 MPasensor1a