German House Parker Honsberg piston flow switch flowmeter

German House Parker Honsberg piston flow switch flowmeter

German House Parker Honsberg piston flow switch flowmeter

MF2-020JA-416303 Shanghai warehouse in stock

Flow switch MF2
Caliber: 22 mm
Shell material: Aluminum
Voltage resistance: PS 100
Medium temperature: -40 ..+100 ° C (medium)
Switching point for H2O water: 3 l/min H2O
Electrical connection: Round plug connector M12x1, 4-pin
High pressure 24 V DC 0.5 A 10 W
Protection level: IP67
Flow direction: horizontal
Country of Origin: Germany

This model is a customized model, please consult before purchasing.

At present, there is a small amount of stock available in Shanghai. Please purchase as soon as possible.

Please contact Shanghai Ouzhen Electromechanical Equipment Co., Ltd., H110 Jiuli Workshop, Lane 218, Huting North Road, Songjiang District, Shanghai

Contact information can be found on the homepage.

Honsberg flow switch for refrigeration compressors

flow switch

Nominal diameter: 22 millimeters

Connection: System Connection

Shell: Aluminum

Voltage resistance: PS 100

Internal parts: Stainless steel 1.4571 flange piston

O-ring: CR 70

Medium temperature: -40 ..+100 ° C (medium)

Switch point H2O: adjusted 10 L/min H2O, decrease

Switch head: plastic PC

Adjustment: None

Electrical connection: Circular plug connector M12x1, 4-pin

Electrical contact: tongue switch

Maximum contact load: 24 V DC 0.5 A 10 W

Wiring diagram: normally open contacts, wiring diagram number 0.419

Protection level: IP67

Flow direction: horizontal

Adjust the switch value
● High reproducibility
● Not sensitive to dirt
feature
The volumetric flow rate separates the piston (equipped with a magnet) from one
The valve seat resists the spring force. Piston driven one
Sealed and isolated reed switch.

Including 5 x DN straight sections at the inlet and outlet
If the medium becomes dirty, please install a filter
Magnetic filters are used for ferrite components.
It is necessary to ensure the given voltage, current
And the power does not exceed.
When connected, the load must be connected in series.
Electrical details are applicable to Ohmic loads.
Capacitors, inductors, and lamp loads must be used
protection circuit