-
E-mail
jscyxyb@hotmail.com
-
Phone
17361727761
-
Address
No. 258 Zhanxi Road, Jiangyin City, Jiangsu Province
Product Categories
Jiangsu Chenyuxin Instrument Co., Ltd
Gas flow meter - selection of pipeline specific gas flow meters
NegotiableUpdate on 04/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
As a professional flowmeter manufacturer, Chenyu produces coke oven gas flowmeters with excellent low-pressure and high-pressure measurement performance, multiple signal output modes, and low sensitivity to fluid disturbances Widely applicable for measuring gases such as natural gas, coal to gas, liquefied gas, and light hydrocarbon gas. Parameters of blast furnace gas flowmeter:
Product Details
As a professional flowmeter manufacturer, Chenyu produces coke oven gas flowmeters with excellent low-pressure and high-pressure measurement performance, multiple signal output modes, and low sensitivity to fluid disturbances Widely applicable for measuring gases such as natural gas, coal to gas, liquefied gas, and light hydrocarbon gas.
Parameters of blast furnace gas flowmeter:
Nominal pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.3MPa (customized for pressures higher than this)
Compensation method: Temperature and pressure dual compensation
Output signal: pulse, 4-20mA, RS485
Communication protocol: MODBUS-RTU, HART (customized)
Power supply: external power supply 24VDC DC power supply, battery power supply 3.6V lithium battery
Usage conditions: medium temperature -20 ℃~80 ℃, ambient temperature -30 ℃~60 ℃, relative humidity 5% -90%, atmospheric pressure 86Kpa-16Kpa
Protection level: IP65, IP67
Explosion proof grade: Exd IC T6GB
Medium of use: natural gas, compressed air, nitrogen and other low to medium flow rate gases
Range ratio: 1:10-1:20
Accuracy: 1.0, 1.5
Material: Aluminum alloy, stainless steel
Product standard: G8_T21391-2008
Installation method: Horizontal installation
Blast furnace gas flowmeter display screen:
Structural detail diagram of blast furnace gas flowmeter:
Flow range of blast furnace gas flowmeter:
| Instrument diameter mml | Standard range (m3/h) | Extended range (m3/h) | ||
| DN20 | S | 2-20 | w | 4-40 |
| DN25 | S | 2.5-25 | w | 4-40 |
| DN32 | S | 4-40 | w | 6-60 |
| DN40 | S | 5-50 | w | 6-60 |
| DN50 | S1 | 6-65 | w1 | 5-70 |
| S2 | 10-100 | w2 | 8-100 | |
| DN65 DN80 |
S | 15-200 | w | 10-200 |
| S1 | 13-250 | w | 10-160 | |
| S2 | 20-400 | w | ||
| DN100 | S1 | 20-400 | w | 13-250 |
| S2 | 32-650 | w | ||
Recommendations for blast furnace gas flow meters:
Fault analysis of measuring coke oven gas with natural gas flowmeter
Similar Product Recommend
