Fully automatic insertion and extraction force testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The fixture issues for various connection tests of the fully automatic insertion and extraction force testing machine, as well as the automatic alignment of male and female connectors during testing, will not have the problem of eating one side. The machine is suitable for testing the insertion and extraction force of various connectors, and when paired with an automatic centering device, it can obtain accurate insertion and extraction force tests, inspection reports, etc.

Product Details

Fully automatic insertion and extraction force testing machineThe fixture issues for various connection tests, as well as the automatic alignment of male and female connectors during testing, will not have the problem of eating one side. The machine is suitable for testing the insertion and extraction force of various connectors, and when paired with an automatic centering device, it can obtain accurate insertion and extraction force tests, inspection reports, etc.

Fully automatic insertion and extraction force testing machineProduct Specifications

model	SE-1220SH (Standard type)	SE-1220HH (High precision type)	SE-1220WH (Widening type)
Minimum displayed itinerary	0.01mm	0.001mm	0.001mm
The distance between the two columns of the machine	240mm	240mm	400mm
Type of load	2kgf、5kgf、20kgf、50kgf、100kgf
report control platform	PC Windows platform+professional testing software
Minimum displayed load	0．01（kg、lb、N、g）
Strength accuracy	± (0.015mm+0.2%) (1% -100% of maximum range)
Maximum Test Journey	150mm
Test speed range	1-200mm/min、1-300mm/min（Option）、1-1000mm/min（Option）
transmission mechanism	High precision ball screw
Drive motor	High response frequency servo motor
shutdown method	Upper and lower limit safety settings, emergency stop button, program force and extension settings, specimen failure sensing
Unit switching	The load unit displays N, lbf, gf, and kgf, which can be freely switched
Measurement project	Maximum load value, peak value, valley value, stroke load value, stroke load value, insertion point resistance value, load or stroke resistance value
Functional Application	Connector single hole insertion and extraction test, connector row insertion and extraction test, connector single pin and plastic retention test, connector NORMAL FORCE test, general compression and tensile failure test, constant tension test, constant pressure test, connector insertion and extraction life test, spring load displacement test, connector contact terminal dynamic impedance test (optional)
Overall dimensions (W × D × H)	450mm×350mm×1050mm

Equipment characteristics:

1. The connector testing fixture is accurate and stable, and the male and female connectors can automatically align without eating on one side.
2. The entire series is equipped with an automatic centering device to ensure accurate insertion and extraction of connector samples during insertion and extraction force testing.
3. PC Windows platform+professional software to manage parameter settings, status control, experimental data collection and processing analysis.

4. Adopting DSP data acquisition system, industrial Ethernet transmission data, sampling rate of 50000HZ, * anti-interference.
5. The curve chart report and text report can be automatically generated into EXCEL and CPK based on the customer's header and logo.
6. Double layer load sensor with gravity protection, providing safety protection for valuable and vulnerable load components, and enhancing overload resistance up to 500%.
7. The analog-to-digital signal conversion adopts a data acquisition card, and the load and displacement analog signals are distinguished and converted, with strong anti-interference ability. 8. Meet high standard requirements and can design testing speeds up to 3000mm/min.
9. Impedance testing system, adjustable in 7 levels, can meet different impedance testing ranges.
10. Constant tensile and compressive testing can be set with force percentage protection, ratio force application, and fracture ratio return.
11. Provide an open calibration program that does not require password input for verification.
12. Optional impedance testing can be used to simultaneously detect the dynamic contact resistance of the connector during force and stroke testing. Impedance testing can reset the terminal to zero.
Standard Configuration
● Standard load cell ● Multi functional fixture and nozzle ● Large X-Y mobile table ● Automatic centering device for whole row insertion and removal