- Phone
-
Address
605, Building A, Beichen Xianglu Yating, Haidian District, Beijing
Beijing Science Popularization Student Analysis Technology Co., Ltd
605, Building A, Beichen Xianglu Yating, Haidian District, Beijing
Fully automatic high-purity hydrogen generatorThe working principle of KPS-H-1 is to use potassium hydroxide solution as the electrolyte to obtain hydrogen gas by electrolyzing water.
Potassium hydroxide is a strong electrolyte that can completely dissociate into positively charged potassium ions and negatively charged hydroxide ions in aqueous solution, and form complex ions with water. Due to the presence of a large number of ions in the solution, under the action of direct current, the positive and negative ions in the solution move towards the two poles, producing hydrogen and oxygen in the electrolytic cell. The hydrogen enters the gas water separator, condenses and separates, and then enters the three pole filter. After adsorption purification, it is output from the outlet *. And oxygen is naturally released from the exhaust port. The instrument is equipped with an anti liquid device to prevent and eliminate the phenomenon of backflow caused by misoperation, ensuring the safe use of the supporting instrument.
Technical parameters of fully automatic high-purity hydrogen generator
Hydrogen purity: 99.999%
Hydrogen flow rate: 0-1000ml/min
Traffic display: LED digital display
Working pressure: 0-0.4MPa (factory set 0.38MPa)
Voltage stabilization accuracy: 0.02 MPa
Power supply:~220V ± 10% 50Hz
Power consumption: 600W
Environmental temperature: 5 ℃~40 ℃
Environmental humidity: ≤ 85%
Dimensions: 680 × 450 × 610 (mm)
Net weight: approximately 32kg