Festo Germany distributes cylinders in stock and provides multi second quotes

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Festo, a distributor of cylinders in Germany, offers many types of cylinders in stock for multiple seconds. According to structural characteristics, it can be divided into piston or diaphragm type and combination type. According to the mode of action, it can be divided into single acting and double acting types. According to the function of the cylinder, it can be divided into general and specialized cylinders. Piston cylinders are widely used, and there are no special requirements in other situations. The principle of graphic symbols is the same as hydraulic cylinders. The graphic symbols for other cylinders can be found in GB/t786.1-1993.

Product Details

Festo Germany distributes cylinders in stock and provides multi second quotes

(1) The normal working conditions of the cylinder are: the medium and ambient temperature are generally -20~80 ℃, and the working pressure is generally 0.1~1.0MPa. Please refer to the technical parameter tables for various types of cylinders for specific conditions.

(2) Before installation, the test should be conducted at 1.5 times the working pressure and there should be no air leakage.

(3) An oil mist device should be installed at the inlet of the installed air source to facilitate lubrication during operation. Reasonable lubrication of cylinders is extremely important, as poor lubrication often leads to crawling and even malfunction.

(4) When installing, pay attention to the direction of movement, and the piston rod is not allowed to bear eccentric or lateral loads.

(5) When the load changes during travel, a cylinder with sufficient output force should be used and an additional buffer device should be added.

(6) Do not use full stroke, especially when the piston rod is extended, do not let the piston collide with the cylinder head. Otherwise, it is easy to cause damage to parts such as pistons and cylinder heads.

FESTO cylinder leakage in Germany refers to the leakage of working medium from the high-pressure chamber to the low-pressure chamber inside the system or component; Leakage refers to the leakage from the interior of a system or component to the outside world. The volume of working medium leaked per unit time is called the leakage amount.

The purpose of installing sealing devices and sealing components in hydraulic and pneumatic transmission systems and their components is to prevent the leakage of working media and the intrusion of external dust and foreign objects. The component that is installed in the sealing device and plays a sealing role is called a sealing element.

The function of sealing is to prevent leakage, and there are two main reasons for leakage: first, there is a gap on the sealing surface; Secondly, there is a significant pressure difference on both sides of the sealed area. Eliminating or reducing any factor can prevent or minimize leakage.

1、 To ensure that the FESTO cylinder does not rust, we try to avoid using both hands to directly take the accessories when using the linear guide. The correct way is to clean the hands thoroughly and remove sweat and stains. You can apply a layer of mineral grease on the surface of the linear guide, and then perform other operations, especially in humid summers, where corresponding moisture-proof measures must be taken.

2、 In terms of usage requirements, FESTO cylinders also have relatively high requirements in terms of the environment they are used in. In fact, although there is a lot of visible dust in the environment, there are still many that exist and cannot be seen. After these dust enter the linear guide rail, they will cause many adverse reactions, such as increasing the wear of the linear guide rail, resulting in increased mechanical vibration, and also increasing noise, ultimately leading to poor use of the linear guide rail.

3、 Regarding installation precautions, when installing the FESTO cylinder, strong stamping should not occur during the entire installation process, and heavy objects should not be used to strike or install the linear guide rail. When improper installation occurs, technical solutions must be immediately adopted.

Festo Germany distributes cylinders in stock and provides multi second quotes