Festo FESTO vacuum valve in stock hot selling

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Festo FESTO vacuum valve is selling well in stock, MHA1-M1AR-3/2G-0, 6-P3 type. Festo FESTO pneumatic control valve will be fined ten $r $n for false supply. German Festo FESTO solenoid valve MHA1-M1AR-3/2G-0, 6-P3 type needs to be installed on a flat surface with screws.

Product Details

Festo FESTO vacuum valve in stock hot selling, MHA1-M1AR-3/2G-0, 6-P3 type, Festo FESTO solenoid valve in stock supply, one penalty of ten for false supply

Festo FESTO vacuum valve in stock hot sellingMHA1-M1AR-3/2G-0,6-P3 型Technical Specifications:

Valve function	3/2 normally closed, single electronic control
Drive Type	electrical
width	10 mm
Standard rated flow rate	10 l/min
work pressure	1.5 . .. 8 bar
design structure	Lift valve with spring reset
Reset type	mechanical spring
protection level	IP40
Rated size	0.65 mm
width dimension	10 mm
Exhaust function	Adjustable flow
Sealing principle	soft
Assembly position	arbitrary
Hand controlled device	Position locking push
Lead type	direct
flow direction	irreversible
Explanation on Forced Power	Switch frequency at least once a week
Maximum switching frequency	10 Hz
Switch time, close	10 ms
Switch time, open	5 ms
Continuous power on rate	100%
power consumption	1 VA
Characteristic parameters of the coil	24 V AC: 50/60 Hz, Raise power consumption to 1 VA, maintain power consumption to 1 VA
Allowable pressure fluctuations	+/- 10 %
working medium	Compressed air complies with ISO8573-1:2010 [7:4:4]
Explanation on Work and Lead Medium	Lubricated compressed air can be used (once used, lubricated compressed air is required to be used continuously)
seismic resistance	Transport application testing, strength level 2, compliant with FN 942017-4 and EN 60068-2-6 standards
impact resistance	Impact test, strength level 2, in compliance with FN 942017-5 and EN 60068-2-27
Corrosion resistance grade CRC	2- Moderate corrosion impact
Storage temperature	-20 . .. 60 °C
medium temperature	-5 . .. 50 °C
ambient temperature	-5 . .. 50 °C
Product weight	10 g
electrical connection	Through an electrical connection board
Installation Type	On the base With through-hole
Pneumatic connection, air port 1	base
Pneumatic connection, air port 2	base
Pneumatic connection, air port 3	base
Material Remarks	Does not contain brass and PTFE Compliant with RoHS
Material information, sealing	FPM HNBR NBR
Material information, shell	PA - Strengthen PPS - Strengthen