Festo Electromagnetic Valve MHA1 Series Low Price Hot Sale

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Festo solenoid valve MHA1 series is a low-priced hot selling product, with the MHA1-M1H-2/2G-0,9-HC type. Festo FESTO pneumatic control valves are available in stock, with a penalty of ten $r $for any false supply. The German Festo FESTO solenoid valve MHA1-M1H-2/2G-0,9-HC plate valve is suitable for single or group installation, with an ultra small design and a rear plug connection

Product Details

Festo Electromagnetic Valve MHA1 Series Low Price Hot Sale, MHA1-M1H-2/2G-0.9-HC type, Festo FESTO solenoid valve in stock supply, one penalty of ten for false supply

Festo Electromagnetic Valve MHA1 Series Low Price Hot SaleMHA1-M1H-2/2G-0, 9-HC type plate valve, suitable for single or group installation, ultra small design, with rear plug connection Technical Specifications:

Valve function	2/2 normally closed, single electronic control
Drive Type	electrical
width	10 mm
Standard rated flow rate	14 l/min
work pressure	-0.9 . .. 2 bar
design structure	Lift valve with spring reset
Reset type	mechanical spring
protection level	IP40
authorization	c CSA us - Recognized (OL) c UL us - Recognized (OL)
Rated size	0.9 mm
width dimension	10 mm
Exhaust function	Cannot be throttled
Sealing principle	soft
Assembly position	arbitrary
Hand controlled device	push
Lead type	direct
flow direction	irreversible
Identification of valve position	label
Explanation on Forced Power	Switch frequency at least once a week
Suitable for vacuum	is
Maximum switching frequency	20 Hz
Switch time, close	5 ms
Switch time, open	4 ms
Continuous power on rate	100%
power consumption	1 W
The maximum forward test pulse with a logic of 0	500 µs
The maximum negative test pulse with a logic of 1	400 µs
Characteristic parameters of the coil	24 V DC: 1 W
Allowable pressure fluctuations	+/- 10 %
working medium	Compressed air complies with ISO8573-1:2010 [7:4:4]
Explanation on Work and Lead Medium	Lubricated compressed air can be used (once used, lubricated compressed air is required to be used continuously)
seismic resistance	Transport application testing, strength level 2, compliant with FN 942017-4 and EN 60068-2-6 standards
impact resistance	Impact test, strength level 2, in compliance with FN 942017-5 and EN 60068-2-27
Corrosion resistance grade CRC	2- Moderate corrosion impact
Storage temperature	-20 . .. 60 °C
medium temperature	-5 . .. 40 °C
ambient temperature	-5 . .. 40 °C
Product weight	10 g
electrical connection	plug
Installation Type	On the base With through-hole
Pneumatic connection, air port 1	base
Pneumatic connection, air port 2	base
Material Remarks	Does not contain brass and PTFE Compliant with RoHS