- Phone
-
Address
No. 75 Shishan Road, Suzhou High tech Zone
Product Categories
Suzhou Shengguang Instrument Co., Ltd
Ferrite content tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The FERRITE-CHECK 240 ferrite content tester adopts a split design, which is easy to use. The ferrite instrument complies with the Basel standard DIN EN ISO 8249 and uses magnetic induction method to measure the ferrite content in austenitic steel and duplex steel. High sampling rate, all signals from the ferrite meter probe are digitized to achieve interference free and accurate measurement of ferrite content. Accurate data, good repeatability, and a detection range as low as 0.2.
Product Details
Ferrite content testerFERRITE-CHECK 240Product Overview:
1AdoptingLCDColor touch panel, easy to operate, with a resolution of320x480Pixel. With rubber protective cover, displayFNorFe%The measurement results.
2Measure the ferrite content in the weld seam
Especially for welded duplex steel, it is important to know whether the weld seam has sufficient ferrite content to ensure its strength. If the ferrite content is low, the weld seam is more prone to cracking when heated, but if the ferrite content is too high, the toughness and ductility of the weld seam will be lost.
3Rapid and continuous measurement of ferrite content
useFERRITE-CHECK 240The ferrite content detector can accurately and quickly determine the ferrite content. When detecting welds on smooth or polished surfaces, the instrument can be switched to scanning mode. When the probe is placed on the surface and moved along the surface, the readings will be continuously stored and statistical data of the minimum, maximum, and average values of the measurement series will be displayed.
4Calibrate the ferrite content detector
FERRITE-CHECK 240The ferrite content detector is equipped with3A calibration standard piece, traceable toNIST
5Remote operation
Implemented on the deviceSCPIInterface, which allows devices to perform remote measurements and transmit measurement values during line operations. throughUSBConnecting ensures continuous measurement of power supply.
6Data output
The instrument can work withWindows PCCommunicate and useLima ConnectThe application allows for statistical evaluation and graphical display of measurement results, and is free of charge.
Ferrite content testerFERRITE-CHECK 240Technical specifications
application: |
Measurement of ferrite content in austenitic and duplex steels |
unit of measurement |
Fe%andFN |
measurement range: |
0.2 - 100 Fe% |
measurement method: |
Single measurement or scanning measurement |
Minimum testing area: |
ø 2mm |
display resolution: |
≤10 0.01 ≥10 0.1 |
Operating temperature: |
0 - 50 °C |
display: |
LCDTouch color screen,320x480pixel |
multilingual: |
German, English, French, Italian, Spanish |
data storage |
10,000Group measurement data, divisible for storage |
Statistical Function |
measured value/maximum/minimum/average/standard deviation |
contact method |
Bluetooth connection, compatible withAndroid, iOSandWindowscommunication |
interface |
USB-CandSCPIinterface |
Transmission software |
Lima ConnectSoftware, free of charge |
power supply: |
3x 1.5 VBattery orUSB-Cexternal power supply |
Continuous operation time: |
Approximately using batteries 25hour,Unrestricted external power supply |
size: |
150 x 85 x 35 mm |
weight: |
320gram(Contains battery) |
Standard configuration of ferrite instrument |
FERRITE-CHECK 240host,Ferrite-2000Probe, probe cable, Bluetooth receiver,3Calibration block, instrument factory test file, instruction manual, battery（3Section), instrument rubber protective cover, instrument box |
If you need a more economical ferrite content detector, you can choose a compact integrated modelferrite-check140,For more information, please contact us.
