Ferrite content detector

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FERITSCOPE DMP30 ferrite content detector is a portable intelligent device newly launched by Fischer Fischer AG in Germany to detect the content of δ ferrite in austenitic and duplex steel base materials and welds.

Product Details

FERITSCOPE DMP30 is a new generation ferrite instrument from Fischer Fischer, Germany. According to DIN EN ISO 2178/ASTM D7091 magnetic induction test method, it is suitable for measuring ferrite content according to the Basler standard. Starting from a coating thickness of 3 millimeters (118 mils), the ferrite content can be determined without being affected by the substrate. Various probe models can be connected to the instrument, suitable for your personal application; The measurement range, accuracy, and repeatability depend on the connected probe. You can find the corresponding probe data table for these data in.

Unified operation, simple and convenient

The entire measurement range from 0.1 to approximately 90 FN only requires one calibration; Reference calibration - Lawrence value or according to customer specific calibration standards; Comply with the measurement accuracy standards specified in ANSI/AWS A4.2M/A4.2:1997, USB and Bluetooth®Interface, FERITSCOPE DMP30 is a compact and durable ferrite detection instrument with an aluminum casing, protection level IP64, Gorilla? Glass display screen protector, the battery can be charged in the instrument or through a separate charger.

1、 FERITSCOPE DMP30 Ferrite Content Detector Measurement Mode:

2. 1. Single reading: After placing the probe each time, the measured reading will be automatically displayed and stored in the instrument.

Free running: After placing the probe on the surface, the continuous display of measurement readings will appear in the - IC memory without an automatic device, which is used to quickly check the distribution of ferrite content in the weld seam.

3. Scanning: The scanning mode allows for defined acquisition of measurement readings as the probe moves on the surface. You can set the number of individual readings in the instrument and the time interval for measurement collection. Helps to determine the ferrite content on the surface area.

铁素体含量检测仪

2、 Feature Overview:

1. Durable handheld instrument for measuring the ferrite content in austenitic and duplex steels;

2. Measurement method: magnetic induction;

3. Storage capacity: 2500 batches and 250000 measurement values;

4. Durable aluminum casing with IP64 protection rating, reinforced glass and soft cushioning;

5. Replaceable lithium-ion battery with a working time of over 24 hours;

6. Easily transfer data through USB-C and Bluetooth;

7. Real time feedback through lighting, sound, and vibration for extreme monitoring;

8. The calibration check function can verify the calibration information you are currently using;

9. Providing digital and analog probes, using F-Adapter, you can still use the entire Fischer probe product portfolio;

10. Applicable to the new Tactile Suite software;

3、 The technical specifications of the ferrite content detector are as follows:

1. Measurement range

（1）0.1～80%，0.1～110WRCF-FN

(2) Resolution 0.1%Or 0.1FN

2. Measurement accuracy

（1）0～5%Add or subtract 0.1 from the measured value%(WRC )

（2）5～80%Multiply the measured value by ± 2%

4、 FERITSCOPE DMP30 Dimensional Drawing:

Typical application areas of FERITSCOPE DMP30 ferrite analyzer: determination of δ ferrite content in austenitic and duplex steels, determination of deformed martensite in austenitic materials, discovery of welds on polished surfaces, acquisition of ferrite content distribution along welds, etc.