Fast temperature to high and low temperature test chamber

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rapid temperature change high and low temperature test chamber, also known as the rapid temperature change test chamber, has a much faster temperature rise and fall speed than the standard high and low temperature test chamber. The specific speed can be customized according to customer requirements, such as an average of 5 degrees/10 degrees per minute or linear temperature requirements.

Product Details

　　Fast temperature to high and low temperature test chamberAlso known as the rapid temperature change test chamber, it has a much faster heating and cooling speed than the standard high and low temperature test chamber. The specific speed can be customized according to customer requirements, such as an average of 5 degrees/10 degrees per minute or linear temperature requirements.

1、 Product Introduction:

　　Fast temperature to high and low temperature test chamberAdopting high stability platinum temperature measurement antibody, LCD Chinese and English touch screen, 120 sets of 1200 segment programming, 999 cycle settings. Equipped with multiple sets of PID control functions and a wind circulation system that meets temperature/humidity testing standards, it can simulate the testing conditions of products in different environments such as rapid temperature changes. It is also paired with a programming system that is easy to operate and learn with high accuracy, providing excellent testing performance.

2、 Specification parameters:

model	KZ-TS-50	KZ-TS-80	KZ-TS-100	KZ-TS-150
model	(A-C)	(A-C)	(A-C)	(A-C)
Internal dimensions W × H × D (cm)	36×35×40	50×40×40	50×40×50	60×50×50
External dimensions W × H × D (cm)	158175144	190×200×210	198×200×220	198×210×225
Temperature range (testing area)	A：-40℃； B：-50℃; C：-60℃)； (High temperature zone:+60 ℃~+150 ℃); Low temperature zone: -10 ℃~-60 ℃; )
Heating time (heat storage area)	RT~180 ℃ takes about 35 minutes
Cooling time (cold storage zone)	RT~-65 ℃ takes about 85 minutes
Temperature response time/conversion time	Within ≤ 5 minutes/≤ 10 seconds
Temperature control accuracy/distribution accuracy	±0.5℃／±2.0℃
thermal insulation material	High temperature resistant and high-density vinyl chloride acetate foam insulator material
system	P. I.D+S.S.R+microcomputer balanced temperature control system
cooling system	French Taikang fully enclosed compressor (or German Bitzer semi enclosed compressor) binary refrigeration
protective device	Non fuse switch, compressor high and low pressure protection switch, refrigerant high pressure protection switch, fault warning system, electronic alarm
Accessories	Observation window (special optional type), two adjustable compartments, power test hole, casters, horizontal bracket
Weight (approximately)	550Kg	900Kg	1000Kg	1200Kg

　　　　 3、 Structural features:

1. Taiwan, China LCD touch screen controller is adopted. The controller operation interface is set with Chinese and English characters for selection. The screen operation is simple, the program is easy to edit, and has an RS-232 computer interface.

2. The large observation window is equipped with lighting to keep the box bright, and the embedded glass inside the heating body is used to maintain clear observation of the situation inside the box at all times.

3. This type of product has the characteristics of high temperature control accuracy and wide control range, equipped with a good intelligent control device, human-machine dialogue touch screen, color LCD display screen, and can be set with multiple programs.

4. We use French compressors and eco-friendly refrigerants R23, R404, and R134.

5. The material inside and outside the box is made of stainless steel plate (SUS # 304), which is formed by a CNC digital working machine. The circular arc shape is beautiful and elegant, and a flat non reactive handle is used for easy operation. The exterior of the box is coated with epoxy resin to enhance its appearance and cleanliness.

6. The insulation layer of the box is made of high-strength PU foam resin and high-density glass fiber cotton, with a thickness of 10 cm to avoid unnecessary energy loss.

7. The supplementary water tank is located at the lower part of the front side of the control box, and the design of the external pull type water tank makes it more convenient for the operator to supplement the water source.

8. There is a test hole with a diameter of 50mm on the left side of the box, which can be used for external testing power or signal lines.

快温变高低温试验箱