Constant temperature peeling force testing machine

Constant temperature peeling force testing machineCustomizable according to requirements!

Meet the standards:

Basic Environmental Testing Regulations for Electrical and Electronic ProductsTest B: High temperature test method GB 2423.2-89 (IEC68-2-2)

GJB150.3 (ML-STD0-810D) High temperature test method

GJB360.8-87 (MIL-STD-202f) High Temperature Life Test

GB/T5170.2-96 "Temperature Test Equipment"

Technical Specifications:

1. Overall accuracy: better than level 1

2. Sensor:2000KG1,1.0High precision force sensor with excellent linearity, good repeatability, and high acquisition frequency.

3. Sensor testing range: 0.5% -100% FS.

4. The sensor is automatically divided into 7 sections and switches automatically based on the load.

5. The acquisition accuracy is 24 bits A/D, the sampling frequency is up to 200Hz, and the resolution is 1/200000.

6. Control system: servo controller

7. Power source: AC brushless servo motor

8. Operation: Fully computer-controlled operation

9. Speed range (fully computer-controlled): 1-300mm/min

10. Test itinerary does not include fixtures:300mm；

11. A set of reference configurations for a computer

12. Transmission screw: Ball screw

13. Transmission device: adopting a dedicated transmission device and a silent force transmission structure

14. Data transmission: RS-232 data transmission, all parameters are saved on the peripheral hardware, and the computer does not need to install any external hardware, which greatly facilitates users to replace, upgrade, and maintain the computer themselves

15. Display System: A self-developed material testing machine specialized software based on the XP platform

16. Dust prevention device: Adopting a folding dust cover to protect the ball screw from dust entering, ensuring the service life and accuracy of the ball screw

17. Multiple protection devices:

①. Mechanical switch protection for upper and lower limit travel

②. Emergency stop switch brake protection in case of emergency

③. Software overload limit protection

④. Breakpoint shutdown protection

18. Shortcut keys: The keyboard style shortcut keys include up/down and shortcut test keys, which greatly improve user testing efficiency.

19. Functional features:

1. Software environment: software packages in both Chinese and English on the Windows XP platform.

2. Language selection: It has multiple language interfaces such as Simplified Chinese, Traditional Chinese, and English that can be freely switched during operation, greatly facilitating the use of the operator.

3. Each numerical unit: has and can be freely converted.

a. Units of strength: kgf, lbf, N, kn, tf (si), bf, tf (long), tf (short), gfd, etc.

b. Displacement units: mm, cm, m, in, etc

c. Stress: kPa, Pa, mPa, GPa, kN/㎡, N/㎡, N/cm2, kgf/m2, kgf/cm2, g/cm2, g/mm2, lbf/in2, etc

d.力量长度: N/mm,N/cm,N/m,kgf/mm,kgf/cm,kgf/m,gf/mm,gf/cm,kN/m,lbf/in 等

4. Basic function: equipped with the basic parameters of a material testing machine:

①. Falling point ②. 0.2% off set ③ Qufu strength ④ Tensile strength ⑤ Elongation rate ⑥ shear strength

⑦. Maximum value ⑧ Fracture value ⑨ Deformation amount ⑩ Average value ⑾ Compare the parameters of 20 models, including graphics, etc

5. Multiple curve display modes: stress-strain, force displacement, force time, strength time, and other curve modes.

6. Utilize data: Use database management to test and standardize, allowing authors to use pre built data or build their own.

7. Test mode: including tensile testing Bending resistance Stress resistance Anti bending Adhesive Tearing be stripped. Setting of elongation, elongation rate, etc.

8. Servo control mode: positioning displacement Fixed speed Constant strain rate Fixed load Fixed load rate and stress rate Stress rate, etc.

9. Convenient and practical zeroing function: force, extension, and displacement can be manually zeroed by pressing one key, and the system also has the function of automatically zeroing at the beginning of the test

10. Dynamic display: During the testing process, the load, elongation, displacement, and selected test curve are dynamically displayed in real-time on the main control screen as the test progresses.

11. Peak holding: Throughout the entire testing process, the maximum value of the test item is always displayed on the screen window following the progress of the experiment.

12. Manual point picking function: It has a special manual point picking function during the testing process.

13. Automatic discrimination: After the sample is damaged, the system automatically recognizes and switches to the next function according to the expected testing requirements.

14. Automatic storage: Test conditions, test results, and gauge positions are automatically stored.

15. Automatic regression: It has the function of automatically returning the intermediate board to the starting point of the test after the test is completed.

16. Graphic analysis: After the experiment is completed, the data can be viewed with a mouse on the test curve. Any point on the test curve can be zoomed in locally for analysis, and printing can be selected.

17. Curve comparison: The curves of the same group of samples can be superimposed for comparison.

18. Report output: Graphics and parameters are open for customers to modify as needed It can be output to WORD report format, which is convenient, easy to learn, practical, and widely circulated in different locations.

19. Automatic fault detection: When the servo system malfunctions, it can automatically diagnose the cause of the fault and store the code of the fault in the servo drive for quick troubleshooting.

Constant temperature peeling force testing machineFor more detailed inquiries, please contact customer service!