F3001X - Intelligent Instrument Flow Accumulator

F3001X Intelligent Instrument Flow Accumulator is an instrument based on ARM microprocessor and combined with various flow transmitters and sensors, which accurately measures and calculates flow for different fluid media through multiple flow mathematical models. It collects, displays, controls, transmits remotely, communicates, prints and processes various signals such as temperature, pressure, flow rate on site, forming a digital acquisition system and control monitoring system. It is widely used in trade settlement and factory measurement management networks in industries such as petrochemicals, chemicals, metallurgy, power, light industry, pharmaceuticals and urban gas.

F3001X - Intelligent Instrument Flow Accumulatorcharacteristic

Suitable for a wide range of flow meters and fluid media.

Automatic conversion of flow units and automatic calculation of flow coefficient for differential pressure flow meters.

The steam density is calculated according to the IAPWS-IF97 formula, and the superheated and saturated states of steam are automatically identified.

Emergency fault tolerance function: When temperature and pressure signals are abnormal, use emergency parameter values for compensation calculations.

Debugging calculation function: supports viewing the raw values of various transmitter/sensor signals; Support viewing intermediate parameters such as density in traffic calculation.

Audit records: Power outage recording function.

Alarm List: Supports recording instantaneous or cumulative alarm information such as flow rate, temperature, pressure, differential pressure/frequency/volume/mass.

Cumulative report: supports cumulative traffic class report, daily report, monthly report, and annual report.

Communication function: Standard Modbus RTU protocol, supporting RS485 and RS232C communication interfaces.

Transmission function: Supports standard current transmission output, with optional signal source channels.

Report backup function: Supports the backup function of various cumulative reports.

Import and export function: Supports the import and export of instrument configuration parameters.

Timer printing function: supports timed printing of data such as flow rate, temperature, pressure, and accumulation.

F3001X - Intelligent Instrument Flow AccumulatorTechnical Specifications

1、display

Screen: 128 * 64 dot matrix monochrome liquid crystal display (LCD)

Accuracy: Display and measurement accuracy: ± 0.2% F.S

2. Processor

Adopting high-performance ARM Cortex-M3 32-bit RISC core

3. Input function

Flow channel: Analog signal: 4-20mA, 0-10mA and other signals;

Frequency signal: Fr (range: 0.0-5000.0 Hz, low level ≤ 1V, high level ≥ 5V)

Temperature channel: 0-10mA, 4-20mA, Pt100 and other signals

Pressure channel: 0-10mA, 4-20mA and other signals

Other input signals (such as switch input (DI)) need to be specified when ordering

4. Output function

Distribution output: Provide 1 set (F12) of 12VDC and 2 sets (Q24, P24) of 24VDC sensor power supply, with a maximum output current of 30mA per circuit, including a 24V flow current distribution Q24 and a 24V pressure distribution P24 that share the ground

Transmission output: Supports 1 standard current transmission output (source optional), load capacity 500 Ω (maximum)

Relay output: Supports 2 relay outputs, contact capacity 3A@250VAC / 3A@30VDC , configurable upper limit, upper limit, lower limit, and lower limit alarms

5. Communication function

Communication Interface: Provides two communication interfaces, RS232C and RS485, for users to choose from, supports Modbus RTU protocol, baud rate - (1200, 2400, 4800, 9600)

Printing interface: RS232C directly connected to micro printer, baud rate 1200

6. Report backup

Report backup and transfer: Supports USB 1.1 and 2.0 protocols, supports cumulative report transfer from 1GB to 32GB USB drives, has strong compatibility, and is compatible with the vast majority of USB drives on the market

7. Power supply

AC power supply: 220VAC/50HZ AC power supply

DC power supply: Supports 24VDC (18VDC-36VDC) DC power supply; Supports 12VDC (9VDC-18VDC) DC power supply
PS型号： F3001X-A3-I1-C4-R2-PWA-SU-L1-VDC1
F3001X-A3-I1-C4-R2-PWA-SU-L1-VDC2

F3001X-A3-I1-C4-R2-PWA-SU-L1-VAC