Explosion proof individual dust sampler

Janebetween

FCG-5 typeExplosion proof individual dust samplerIt is developed specifically for the standard GBZ/T 192 Determination of Dust in Workplace Air, used for long-term or individual sampling, and for sampling total dust, respiratory dust, and metal dust using (1-5) L/min flow membrane sampling clamps.

FCG-5 typeExplosion proof individual dust samplerBuilt in mining lithium-ion rechargeable battery, can work continuously for more than 8 hours, uses high-performance air pump, has strong load capacity, high flow accuracy, ultra long working time, small size, light weight and other characteristics. It is currently an ideal sampler among similar instruments in China. The instrument casing is made of high-strength AS and ABS colored engineering plastics, and has undergone special treatment for moisture, dust, and static electricity prevention.

1、 Technical parameters

◆ Sampling flow rangeOptional：

0.1～3.0L/min ，1～5L/min(New Standard)
Flow error: ≤ 5%
◆ Timing range: freely set within 99 hours and 59 minutes
Continuous working time:>8 hours
Timing error: ≤ 1 ‰
◆ The biggestexhaustNegative pressure: ≥ 35000pa
Working temperature: -10 ℃ to 40 ℃
Storage temperature: -40 ℃ to+60 ℃
Environmental atmospheric pressure: 80KPa~110Kpa
Relative humidity: ≤ 95%
Noise: ≤ 55dB
The control button allows for pausing sampling during breaks, meals, or other situations
◆ Anti backflow suction system: It can prevent liquids and particles from being sucked back into the instrument, thereby extending its service life
◆ Explosion proof form: intrinsic safety typeEx ib ⅡBT3Gb

◆ Power supply:Built in mining lithium-ion rechargeable battery7.4V/2.3aH DC， matchLithium battery specific charger
Weight: Approximately 0.4kg

2、 Operation
1. Sampling: Press the "confirm/cancel" button on the microcomputer, and the display screen will show "00:00". Then press the "minute" button to select the desired time. The maximum time for this button is 59 minutes. If 59 minutes is not enough, press the "hour" button again, and the maximum time for this button is 99 hours. When the time is selected, press the "confirm/cancel" button again to start sampling. At the same time as the sampling pump is working, the computer enters a countdown state. When the computer displays "0:00", the host is controlled by the computer program to automatically cut off the power.
To reset or shut down prematurely, simply press the "Confirm/Cancel" button to enter the reset or shutdown process. The display screen shows' 0:00 '.
3. Charging: Insert the AC power cord into the instrument's 220V AC input terminal and the mains power respectively. The instrument is in the off state, and a full charge takes about 6-8 hours (standard charging time). It can work continuously or cumulatively for about 12 hours each time it is fully charged.
4. Precautions: Long term storage should be done in a well ventilated and dry place. If it is not used for more than 2 months, it should be recharged to ensure the service life of high-energy mining lithium batteries.
During the transportation and carrying of the instrument, other things should be prevented from touching and pressing the three buttons of the microcomputer to avoid accidental startup.

IIIInstrument accessories

Instrument box (2 units/box) 1 unit

Lithium battery specific charger1 piece

One Φ 25mm cyclone sampling head

Two Φ 25mm dust measuring filter membranes

1 box of Φ 25mm filter membrane clamp

Tweezers, screwdrivers, backpacks each1 piece

Connect silicone tubing 1 piece

Instruction manual 1 copy

certificate 1 copy

Warranty Card 1 copy