Explosion proof high and low temperature test chamber

Explosion proof high and low temperature test chamberExplosion proof high and low temperature test chambers and explosion-proof high and low temperature chambers are devices that have explosion-proof functions installed in ordinary test chambers, such as thickening the inner tank material and installing explosion-proof ports. They are often suitable for testing explosive and flammable products, such as batteries, lithium batteries, cadmium nickel batteries, power batteries, etc., for high temperature resistance, low temperature resistance, high and low temperature alternating, high and low temperature cycling, high and low temperature constant tests or experiments.

Explosion proof high and low temperature experimental box, explosion-proof high and low temperature box working dimensions: AP-GD-225 W width 60XH height 75XD depth 50cm

All are based on the standard GB8897.4-200 (idt IEC60086-4:2000) "Primary batteries - Part 4: Safety requirements for lithium batteries" GB8897.5-2006 (idt IEC60086-5:2005) "Primary batteries - Part 5: Safety requirements for aqueous electrolyte batteries", IEC 62133:2002 "Safety requirements for alkaline or other non acidic electrolyte secondary cells and battery packs - Portable sealed secondary cells and battery packs", IEC61951-2: 2003 "Portable sealed rechargeable batteries and battery packs containing alkaline or other non acidic electrolytes - Part 2: Nickel metal hydrides", IEC61951-1:2003 "Portable sealed rechargeable batteries and battery packs containing alkaline or other non acidic electrolytes - Part 1: Nickel cadmium batteries", IEC 61960:2003 "Alkaline or other non acidic electrolyte secondary cells and battery packs" The portable secondary lithium single cell battery and battery pack "and UL 1642:2006" Lithium Battery Pack "are subjected to thermal abuse and thermal shock tests.

Explosion proof high and low temperature test chamberMeet the standards:

GB/T2423.1-2 Basic Environmental Testing Procedures for Electrical and Electronic Products - Tests. A: Low temperature test method, Test B: High temperature test method

GB/T10592-1989 Technical conditions for high and low temperature test chambers

GB/T10589-1989 Technical conditions for low-temperature test chambers

GB/T 2421-1991 General Principles for Basic Environmental Testing Procedures for Electrical and Electronic Products

GB/2423.34-86. MIL-STD883 (Method 1004.2) High and Low Temperature Combined Cycle Test

GB/T2423.4-93 (MIL-STD810) Method 507.2 Procedure

Explosion proof grade: Exd Ⅱ BT4

GJB/150A-2009. Laboratory Environmental Test Methods Part 1

Temperature range: 0~+150 ℃/20~+150 ℃/-40~+150 ℃/-50~+150 ℃/-60~+150 ℃/-70~+150 ℃

Normal heating time:+20 ℃~+150 ℃, less than 45 minutes, non-linear no-load.

Normal cooling time: 20~- ℃ less than 30 minutes/+20~-20 ℃ less than 45 minutes/+20~-40 ℃ less than 60 minutes/+20~-50 ℃ less than 65 minutes +20~-60 ℃ less than 70 minutes/+20~-70 ℃ less than 75 minutes non-linear no-load

Control stability: ± 0.5 ℃; Distribution uniformity: ± 2 ℃

Structure: The overall structure is in the form of a body, with the cooling and freezing system separated from the box.

Inner box material: SUS 304 # stainless steel plate

Outer box material: SUS 304 # stainless steel plate/special anti rust treatment cold-rolled plate spray painted paint (color can choose your favorite color)