Electronic tensile testing machine

One Introduction:

Electronic tensile testing machineIt is an instrument that verifies the quality or performance of a product or material according to design requirements before it is put into use. The servo motor is controlled by the speed regulation system to rotate, and after deceleration by the reduction system, it rises and falls through a precision screw pair with a crossbeam to complete the tensile mechanical performance test of the sample, with a wide speed regulation range. This machine is widely used for material inspection and analysis in industries such as spring production, building materials, aerospace, machinery manufacturing, wire and cable, rubber and plastics, textiles, and home appliances.

II Product Features:

1. The speed control system adopts servo motors and reducers, with stable and reliable performance, and protection functions such as overcurrent, overvoltage, and overload.

2. The transmission part adopts a circular arc synchronous toothed belt and a precision screw pair for smooth transmission, low noise, and high transmission efficiency.

3. Automatic shutdown: After the sample breaks, the moving crossbeam automatically stops.

4. Limit protection: It has two levels of limit protection: programmable and mechanical.

5. Equipped with a microcomputer interface, it can be connected to an external microcomputer to control the experimental process and store and print data.

Electronic tensile testing machinePrecautions for use:

The fixture of the tensile testing machine must be coated with anti rust oil;

2. Regularly check whether the screws of the jaws are loose and tighten them in a timely manner;

3. Regularly check whether the connecting wires behind the controller are in good contact, but note that the power supply of the controller must be turned off before plugging and unplugging the interface of the connecting wires. The interface should be properly matched, otherwise it will cause damage to the testing machine;

4. In the case of long-term power on, it will affect its service life, so if the machine is not used for a long time, please turn off the controller and computer;

5. There should be a dedicated person responsible for maintaining the balance wing testing machine.