- Phone
-
Address
Shuangxu Road, Chengbei Industrial Zone, Jiangdu District, Yangzhou City, Jiangsu Province
Product Categories
Yangzhou Ruiyou Experimental Equipment Co., Ltd
Electronic tensile testing machine manufacturer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Electronic tensile testing machine manufacturers provide high-quality products for testing the tensile strength, compressive strength, elongation, and elongation of various materials, semi-finished products, and finished products. It can be used for peeling, tearing, bending, bending, compression, and other tests, and is suitable for use in industries such as metal, plastic, rubber, textiles, synthetic chemicals, wires and cables, leather, etc.
Product Details
1、 Overview:
TY8000 series electronic universal testing machineThe servo controlled material testing machine is suitable for testing the mechanical properties of various metal and non-metal materials, such as tension, compression, bending, shearing, tearing, peeling, and puncture. It can also perform automatic control tests of constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle. Calculate indicators such as elongation, tensile strength, flexural modulus, elastic modulus, yield strength, net energy, flexural energy, and total energy.
2、 This machine can handle curve categories:
Load vs. displacement load vs. time displacement vs. time stress vs. strain load vs. two-point extension, and can be tested and data provided according to standards such as GB, ISO, DIN, ASTM, JIS, etc.
3、 Performance characteristics:
This machine is driven by a servo motor, and the planetary reduction system with high rigidity, high precision, and high transmission efficiency drives the ball screw to achieve the experimental loading process. This machine adopts a DSP+MCU fully digital closed-loop control system for control and measurement. The computer is used for dynamic display of the test process and test curve, and data processing is carried out. After the test is completed, the data can be reanalyzed through a graphical processing module to achieve secondary editing. Excel data export and printing of test reports are available, and the product performance reaches a high levellevel
4、 Technical parameters:
| model | TY8000-Aseries |
| Capacity selection | 5，10，20，50，100，200，500，1000kg |
| Unit switching | Kg, lb, N,kN |
| 荷重解析度 | 1/100000 1/300000 1/600000 1/1000000 |
| 荷重精度 | ≤±0.5% |
| Power amplification factor | 0.25 0.5 0.75 1or(or)×1,×2,×5,×10,×20,×50,×100 |
| long stroke | 1000mm(Excluding fixtures) |
| effective width | 420mm |
| test speed | 0.001~1000mm/min |
| speed and accuracy | ≤±0.3% |
| Displacement decomposition degree | 0.001mm |
| motor | ACservo motor |
| drive | servo drive |
| speed reducer | Planetary Reducer |
| screw | Ball screw |
| volume | 800×500×1600mm(WxDxH) |
| weight | 230kg |
| power supply | 220V, 500Wor |
Electronic tensile testing machine manufacturerGuide verification procedures
1. Strength testing of electronic tensile testing machine
After entering the computer program of the electronic tensile testing machine, open the calibration interface and start the test. Take a standard weight and lightly hang it on the upper fixture connection seat. Record the force value displayed on the computer and calculate the difference with the standard weight weight. The error should not exceed ± 0.5%.
2. Speed verification of electronic tensile testing machine
a. Firstly, record the initial position of the cross arm of the machine and select the speed value on the control panel (using a standard straight steel ruler to measure the travel of the cross arm).
b. At the same time as starting the motor, the electronic stopwatch starts counting for one minute. When the stopwatch reaches the time, press the machine stop button. Based on the time of the stopwatch, record the travel value of the cross arm as the rate per minute (mm/min). Observe the difference between the cross arm travel value and the straight steel ruler, and calculate the cross arm travel error value, which should not exceed ± 1%.
Electronic tensile testing machine manufacturerdirect selling
