Electronic peel testing machine 90 degree waterproof membrane

1. Electronic peel testing machine 90 degree waterproof membrane

1.1main purposeAnd scope of use

DL-1000typeElectronic peel testing machine 90 degree waterproof membraneIt is mainly used for on-site testing of the peel strength between the waterproof layer and the reference layer of new waterproofing membranes, and can also be used for testingConduct tests on the adhesion of copper foil circuits, various pressure-sensitive tapes, acetate cloth tapes, tin foil, aluminum foil, stickers, 3M adhesives, films, and other materials to the surface of objects on the PC version. Simultaneously counting the force value extension, setting the force value to stop (constant force extension), setting the extension length to stop (constant tensile stress), displaying the average value, and infinitely adjusting the speed. It can display the maximum force value, peel strength, and maximum elongation at once. Without the need for operators to record and calculate separately, it greatly improves the reliability of the experiment and is a handy experimental instrument for laboratory and metrology departments.

Electronic peel testing machine 90 degree waterproof membraneMain functional features

(1) Maximum test force:DL--1000type 1000N

(2)Effective measurement range of experimental force:10N1000N

(3)Minimum resolution value of experimental force:0.1N

(4)maximumitinerary：400mm、

(5)Test speed:1mm/min-150mm/min、

(6) Loading method: electric

（7）Voltage:220V

3Electronic peel testing machine 90 degree waterproof membraneNormal working conditions

★in0～Within the range of 55 ° C;

★Relative humidity not exceeding80%；

★power supply24±10%VDC,frequency50Hz；

★Stay away from strong electromagnetic interference.

4Electronic peel testing machine 90 degree waterproof membraneWorking conditions of the testing machine

(1) Within the temperature range of 10-30 degrees Celsius at room temperature.

(2) The relative humidity is less than or equal to 80%.

(3) In a vibration free environment.

(4) Install correctly on a stable foundation or workbench.

(5) There is no corrosive property around. 、

(6) The fluctuation range of voltage should not exceed ± of the rated voltage10%

5Installation and adjustment;

(1) Remove the testing machine from the packaging and inspect it for any bumps or damages during transportation.

(2) Place the testing machine on a sturdy platform and adjust the leveling screw under the base to align the equipment in a horizontal state.

(3) The power supply system is a unidirectional 220V power supply. The voltage error should not exceed 10% of the standard voltage. It is important to ensure that the testing machine casing is reliably connected to the indoor ground wire through wires to ensure safe use.

6Maintenance and upkeep of testing machines

(1) Screw and skateboard should be regularly oiled

(2) The copper sleeve on the screw should be refueled once per shift

(3) The oil in the turbine box should be changed every three years

(4) The surface of the used testing machine should be wiped clean and covered with a dust cover.

(5) Regularly check if the bottom line is firm.