- Phone
-
Address
Cangzhou West Industrial Zone, Hebei Province
Product Categories
- cutting knife
- Compaction instrument
- Peel testing machine
- Penetration of asphalt mixture
- Wear machine
- Asphalt mixer
- Concrete test block curing cage
- Gypsum (mortar) water retention rate
- Vertical permeability deformation meter for coarse-grained soil
- Guardrail thrust gauge
- Direct cutting instrument
- compression testing machine
Cangzhou Ranbo Instrument Equipment Co., Ltd
Dumbbell shaped rectangular cutting knife for geotextile cutting
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Dumbbell shaped rectangular cutting knife for geotextile cutting: $r $n $r $n is a tool for making waterproof roll rubber plastic test specimens. A tool for making rubber and plastic test specimens for waterproofing membranes. A tool for making rubber and plastic test specimens for waterproofing membranes. A tool for making rubber and plastic test specimens for waterproofing membranes. Tools for making waterproof rolls, rubber and plastic test specimens
Product Details
Dumbbell shaped rectangular cutting knife for geotextile cutting:
Rubber cutting knife, plastic cutting knife, film cutting knife, right angle tearing cutting knife, tearing cutting knife
For blade maintenance:
The cutting edge of the cutting blade should be regularly maintained and serviced, as blunting, chipping, or curling of the edge can cause defects in the specimen and affect the test results. When the cutting blade is not in use, the cutting edge should be placed on a soft sponge or kept out of contact with any surface.
It should be stored in a dry environment and coated with protective oil to prevent the cutting blade from being corroded.
When using, the cutting edge should be protected by placing a suitable soft and hard tape or cardboard underneath the sample to protect the cutting edge from damage. The cutting edge should be regularly adjusted
Dumbbell shaped rectangular cutting knife for geotextile cuttingGrind to maintain sharpness.Note: The maintenance of the cutting edge is very important. The cutting edge can be lightly ground and trimmed with a grinding stone, and the condition of the cutting edge can be evaluated by testing the fracture point of the sample after a series of experiments. When removing the fractured specimen from the clamp of the testing machine, check whether there is a tendency for the specimen to fracture at or near the same point. If there is such a tendency, it indicates that the cutting edge may become dull, have a notch, or curl at this specific location.Cutting lubrication:Lubricate the cutting blade or sample surface with diluted detergent, and pay attention to wiping the metal surface dry after using the lubricant to prevent rusting of the cutting edge.
1. 3 × 100 plastic film, pipe type
2. 6 × 115 rubber and plastic [type]
3. 5 × 100 rubber and plastic
4. 4 × 75 rubber, cable type
5. 4 × 50 rubber, cable type
6. 2 × 35 rubber type
7. 10 × 120 plastic filmclass
8. 10 × 150 plastic film category
9. 13 × 152 porous materials
10. Rubber plastic right angle tearing cutter
11. Double V-notch impact cutting knife for plastic steel doors and windows
12. Pant tearing cutter
13. Star Moon Cutting Knife [Customers can choose whether to equip with a cutting tool or not]
Similar Product Recommend
