Electric single blade notch prototype

XQZH-3 typeElectric single blade notch prototypeIntroduction

1、 Equipment Overview

XQZH-3 typeElectric single blade notch prototypeMainly used for preparing sample spline notches for simply supported beam and cantilever beam pendulum impact tests. The XQZH-3 notch preparation machine uses an electric single blade method to prepare sample notches. It has a simple structure, easy operation, fast sample preparation, and accurate size, making it an ideal equipment for preparing sample notches.

XQZH-3 typeElectric single blade notch prototypeCan prepare simply supported beams (GB/T1043.1-2008)）Type 1 specimen, cantilever beam (GB/T1843-2008)）Type 1 specimen and cantilever beam (American standard ASTMD256)）2. Type 3 and 4 specimens. The types of gaps are A, B, and C. Different types of samples can be prepared by replacing the single blade and adjusting the sample jaws. Multiple samples can be prepared in batches, with fast sample preparation speed, accurate size, and easy operation.

This prototype can prepare notches that meet the following standard specimens:

GB/T1043.1-2008 "Determination of Impact Performance of Plastic Simply Supported Beams Part 1: Non Instrumented Impact Test".

GB/T1843-2008 "Determination of Impact Strength of Plastic Cantilever Beams".

ASTM D256-1997 "Plastic Cantilever Beam Impact Test Method" and other standard requirements

2、 Technical parameters

1. Gap motor: 60W, 260r/min

2. Feed motor: 60W, 65r/min

3. Cutting speed: 114mm/min

4. Gap depth adjustment stroke: 10mm

5. The width of the fixture is 45mm, and a maximum of 10 samples with a thickness of 4mm can be milled each time

6. Sample type:

Simply supported beams (GB/T1043.1-2008)）Type 1

Cantilever beam (GB/T1843-2008)）Type 1

Cantilever beam (American standard ASTMD256)）2. Types 3 and 4

7. Sample notch types: A type, B type, C type

A-type cutting tool: 45 º ± 30 ', R=0.25 ± 0.05mm

B-type cutting tool: 45 º ± 30 ', R=1.00 ± 0.05mm

C-type cutting tool: 45 º ± 30 ', R=0.10 ± 0.02mm

8. Equipment dimensions: 420 × 350X270mm

3、 Product Structure

4、 Structural characteristics

Electric single blade notch prototypeIt mainly consists of a notched single blade power head, a sample fixture, and a feed lifting platform. The single blade power head is driven by a motor, which drives the milling cutter to rotate quickly and cut the sample notch. Different types of sample notches use different standard milling cutters.

The sample clamp fixture is used to clamp the sample and can be clamped at onceone or moretrysampleThe feed lifting platform comes with a micrometer head to fine tune the depth of the gap. The feed motor realizes milling and cutting tool feed. Samples can be processed individually or in multiple pieces. Exquisite mechanism, wide adjustment range, fast processing speed, and stable feed.

XQZH-3 typeElectric single blade notch prototype