Electric hydraulic drum brake

NegotiableUpdate on 06/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The electric hydraulic drum brake is easy to install and safe to use, which can meet the heavy-duty high-speed braking requirements of construction machinery such as wind turbines and high-speed trains Currently, it is widely used both domestically and internationally. The following are the products and performance indicators produced by our company, which can also be processed according to the specifications and dimensions requested by customers. Test conditions and indicators: moment of inertia (KgM355), dual disc diameter (m) 0.78, friction plate area (mm, rotational speed (rpm, linear velocity (m/s) 4260, brake pad specific pressure (Mpa) 22, energy consumption per unit area (J/mm, friction coefficient 0.25-0.4015-0.3, wear amount (cm))^

Product Details

Electric hydraulic drum brakeElectric hydraulic drum brake

Previous post:SYFS-08ANext:SYFS-05C\\ndetailed explanationSYFS-08ASize:89.5mm*64.9mm*18.4mmFriction material:FRK980Surface treatment: Copper plating Application: Wind turbine brake Performance characteristics: stable friction coefficient, wear resistance, high temperature resistance, easy installation Brake pads for high-speed shafts of wind turbines Introduction:FRK980Copper based powder metallurgy wind power brake pads are a friction material independently developed by our company's technical personnel.

Its performance is similar to that of foreign Miba companyMD550Friction materials,FRK980It is a friction material made of copper powder as the matrix, special wear-resistant alloy particles as the friction component, and special sintering technology for coke brake. It is produced at high temperatures（700℃) has the characteristics of stable friction coefficient, low wear, minimal damage to brake discs, easy installation, and safe use, which can meet the heavy-duty high-speed braking requirements of construction machinery such as wind turbines and high-speed trains.Currently, it is widely used both domestically and internationally. The following are the products and performance indicators produced by our company.

It can also be processed according to the specifications and dimensions requested by the customer. Performance indicators: Test conditions and indicators of rotational inertia（KgM355Dual disk diameter（m）0.78Friction plate area（mmRotational speed（rpmLinear velocity（m/s）4260Brake pad pressure ratio（Mpa）22Energy consumption per unit area（J/mmcoefficient of friction0.25-0.40.15-0.3Wear amount（cm^3/GJ；font-size：9.0000pt.

mso-font-kerning：1.0000ptPrevious article:SYFS-09Next:SYFS-07B\\nJiaozuo Linrui Brake Jiaozuo Brake Niudai:08Jiaozuo Linrui: Linrui Friction Disc Linrui Brake Industrial Zone\\nDetailed instructions on installing the brake onto the support and tightening tool:6000NM，60MMSteps for torque wrench: Place the two halves of the brake on the support so that the support is located in the middle of the two halves of the brake.

Use fixing screwsM39X（405+B）Fix these two halves of the brake in place. （B-Brake disc thickness) installation nutM39The tightening torque for each nut is5000NMCheck the tightening torque of the relative nut. Check: brake disc parallelism,0.2The parallelism of support,0.2Symmetry of support relative to the disk:0.5II---Hydraulic connection, oil injection and exhaust are connected to the hydraulic station using oneM18X1.5The connector connects the brake to the hydraulic station.

Clean all pipes, joints, and ensure that the entire hydraulic system is clean (free of dust and debris). Recommended oil: