Electric heating type open mill

1. Excellent performance description:

①Automatic temperature control (uniformity can replace oil heating): Each roller is temperature controlled in different areas, so that the temperature distribution of the entire roller is uniform, and there will be no high temperature in the middle and low temperature on both sides.

②Automatic roller distance adjustment: Click on the screen roller to automatically adjust to the set opening, which can preset 4 opening values. Click on it. Quick, accurate, and free from manual labor!

③Automatic speed regulation: Set the required speed of the roller, and the system will automatically adjust to the set speed without the need for a knob.

④In case of emergency, the roller automatically retracts and opens: In case of emergency, tapping or touching the emergency safety settings will immediately cause the roller to pop open and reverse, and the danger will be immediately relieved!

2.Roller diameter * roller surface length: 160 * 350mm， The diameter of the roller is 160mm, and the length of the working surface of the roller is 350mm， Rubber mixing capacity: about 0.1-2kg,Size: 6 inches.

3.Heating method: electric heating

4.Temperature range: normal temperature～260℃

5.Heating time: room temperature～160 ℃ takes about 30 minutes

6.Roller surface temperature difference: ± 1.5 ℃

7.Temperature control accuracy: ± 0.5 ℃

8.Temperature display resolution: ± 0.1 ℃

9.Temperature sensing probe: capable of real-time detection of roller temperature (platinum Pt100)

10.Roller material: alloy steel, hardness HRC55-62

11.Roller speed ratio: Dual frequency regulator, freely adjustable

12.Roller speed: 1～33rpm, Click on the screen to run automatically

13.Roller spacing: adjustable from 0.1-10mm, automatically adjusted to the set position by clicking on the touch screen system, no manual hand adjustment required, high efficiency.

14.Material blocking plate: made of high temperature resistant material or copper, adjustable left and right, with a fixing device, high temperature resistant, and not easy to damage the roller surface.

15.Bearing: Adopting Japanese NSK self-aligning bearings, with reserved effective oil injection ports for easy lubrication, and equipped with bearing sealing devices to effectively prevent dust or foreign objects from entering the bearings and extend their service life.

16.Motor: 2.2KW/3.7KW/5.5KW * 2 units

17.Inverter: 2.2KW/3.7KW/5.5KW*2 units

18.Machine base: National standard thickened steel welded as a whole, sturdy and durable, not easily deformed.

19.Rack: All treated with baking paint, with good surface glossiness, more durable, and less prone to delamination.

20.Traditional device: heavy-duty hinge transmission, hard faced gears, smooth continuous rotation with low noise.

22.Safety device:

①Reverse door device, knee touch emergency stop reverse, roller immediately bounces open+reverse 1/5~1/4 turn;

②There are button devices at both ends of the console: up, down, left, and right positions for tappingThe roller immediately bounces off the device+Reverse 1/5~1/4 turn;

③ Safety top bar and panel shutdown device;

23. Power supply: AC380V 50Hz 10KW or above

24. Volume: 125x80x155cm (length x width x height)

25. Weight: Approximately 750kg or more