ESD electrostatic testing table standard

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ESD static electricity testing table standards (IEC61000-4-2 and GB/T17626.2) ESD-DKFC is an ESD solid wood static electricity standard testing table, which adopts a mortise and tenon structure, and the entire table body does not include screws and metal parts; It is a wise choice for scientific research and quality inspection departments. Compared to the structure of laminated board materials, the data measured by the all solid wood testing platform is more accurate, and the testing environment provided for ESD electrostatic testing of products is also more standardized. Our DKFC model adopts a detachable split structure, which can be disassembled for long-distance logistics transportation. After disassembly, the volume is small and easy to transport.

Product Details

ESD static test bench standards (IEC61000-4-2 and GB/T17626.2) ESD-DKFC is an ESD solid wood static test bench standard

One·ESD electrostatic testing table standard The technical specifications of DKFC are as follows:

Wooden table: 1600mm x 800mm x 800mm (length x width x height) 1 sheet

Reference grounding plate: 2700mm x 1800mm x 1.0mm (length x width x thickness) 1 sheet

Horizontal coupling plate 1600mm × 800mm × 1.0mm (length × width × thickness) 1 sheet

Vertical coupling plate: 500mm x 500mm x 1.5mm (length x width x thickness) 1 sheet

Insulation pad: (rubber pad) 1400mm x 700mm x 0.5mm (length x width x thickness) 1 sheet

Grounding cable: 2 pieces of 470k Ω× 2

Release wire: Copper wire strip release brush 1 piece

Ground wire: 1 copper wire

Set of tools: 3-in-1 screw set, self tapping screw, screwdriver, nut, wrench set

At present, our company has two models: ESD-DKFA (laminated board material, economical electrostatic testing platform) and ESD-DKFC (solid wood using pine wood material, high standard electrostatic testing platform).

Two·ESD electrostatic testing table standard ESD-DKFC adopts the mortise and tenon structure in traditional woodworking techniques, and its characteristics are as follows:

① The entire table body is made of solid wood, with higher stability than plywood materials (plywood, composite panels)

② The table body adopts a mortise and tenon structure, without screw metal (if some solid wood test benches include FA models, screws are still used to fix the corners of the table)

③ A complete set of 4 steps is required to install an ESD-DKFC table body in just 3 simple steps, while the FA model requires over 10 steps for installation

④ FC uses imported pine wood from New Zealand, with a tight material. The table body is reinforced with 25mm wooden boards at the bottom, and the table corners are made of 80mm square columns. The overall weight can withstand 300kg.

The detailed list of goods is as follows

Accessory name	material	Specification: Length * Width * Height/Thickness	quantity	remark
Wooden table top	pine wood	160080025mm	1 sheet
Side crossbeam plate	pine wood	130010025mm	2 sheets
Side support plate	pine wood	8080800	2Zhang
Reference grounding plate	aluminum plate	18009001.0mm	3Zhang
Horizontal grounding plate	aluminum plate	16008001.0mm	1Zhang
Vertical coupling plate	aluminum plate	5005001.5mm	1Zhang
Vertical coupling seat	pine wood	52020025mm	1Zhang
insulating mat	Pressure resistant insulating plastic	14007000.5mm	1Zhang
Resistance wire	Copper wire+resistor	470KΩ*2	2root
Release Line	Copper wire+conductive cloth	1.5-22.5 meters in diameter	1root
ground wire	copper wire	22.5 meters in diameter	1root
Double-sided conductive cloth	conductive fabric	50*1900mm	2roll up
Screw/Nut	304	M4	5piece
3Unified screw	iron	3Integrated screw and nut set	11piece
screwdriver	iron	small screwdriver	1turn
wrench	iron	7#	1turn

Transportation method: In the surrounding areas of Shenzhen, direct delivery will be made to the customer's location, and installation services will be provided.

In other provinces and cities, logistics transportation to the customer's location provides technical installation guidance and can be paid for on-site installation.

In foreign regions, packaging according to export standards, customers can declare customs on their own; We can also handle customs clearance matters.