ESD electrostatic discharge test table

Shenzhen Ouruifan Testing Equipment Co., Ltd

Shenzhen Orifan Technology Co., Ltd

1ESD electrostatic discharge test tableProduct Features

1Grounding reference plane（GRP）

Thickness not less than0.25mmCopper plate, aluminum plate or thickness not less than0.65mmOther metal material sheets. And it is safely grounded.
At least extend the tested equipment from each side of the grounding reference plane（EUT）0.5mThe smallest size is1m X 1m.
Test equipment（EUT）The distance between the laboratory walls and other metal objects should be at least1m.
The thickness of the insulation support between the floor standing equipment and the grounding reference plane is0.1m.
Desktop devices placed on the ground reference plane0.8mOn a tall wooden table. Place the area on the desktop1.6 X 0.8mHorizontal coupling plate, and using a thick0.5mmThe insulation liner isolates the tested equipment, cables, and coupling plates.

If the test equipment is too large to maintain the smallest distance from each side of the horizontal coupling plate0.1mmThen use another identical horizontal coupling plate to place it on the shorter side of * *0.3mHere. Two horizontal coupling plates with two470kConnect the Ω resistor cable to the grounding reference plane.
2The size of the vertical coupling plate is0.5m X 0.5mPlace and maintain parallel test equipment0.1mDistance.

IIESDStatic discharge test tableTechnical specifications

Test bench:1600mm×800mm×800mm(Length x Width x Height) 1Zhang
Reference grounding plate:2700mm×1800mm×1.0mm(Length x Width x Thickness) 1Zhang
Horizontal coupling plate:1600mm×800mm×1.0mm(Length x Width x Thickness) 1Zhang
Vertical coupling plate:500mm×500mm×1.0mm(Length x Width x Thickness) 1Zhang
Insulation pad: (rubber pad)1400mm×600mm×0.5mm(Length x Width x Thickness) 1Zhang
Resistive cable:470kΩ×2 2root
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->4after-sales service

Customer satisfaction is our service tenet, and our after-sales service relieves all your worries. We firmly believe that a good enterprise sells not only a good product, but more importantly, good service. Shenzhen Ouruifan Testing Equipment Co., Ltd. is responsible for providing the following after-sales services for our company's products:

1. Technical training: operation and use, daily maintenance, common fault detection and troubleshooting

2. Regular follow-up: equipment inspection, troubleshooting, and message transmission

3. Special reserve support for spare parts and components

4. The after-sales service department provides quick response for repair services

5. Dedicated maintenance personnel ensure timely and effective troubleshooting