EMG control board SPCC1-7

EMG control board SPCC1-7Ningbo Bingsheng has its own joint venture procurement company in Europe and America, which directly purchases from European sources and sells domestically. It can provide proof of origin and customs declaration.

Ningbo Bingsheng

Yan Gong

EMG control board SPCC1-7

1、 Core functions and application areas

1. Analog signal processing
   SPCC1-7 is an analog input module mainly used in industrial automation and control systems to collect signals such as temperature, pressure, and speed, and convert them into digital data.

• Compatible with multiple sensor types (such as temperature and pressure sensors)

• Support remote monitoring and system maintenance

2. Central control core
   As a central controller motherboard, SPCC1-7 is commonly used in correction systems, coupled with servo valves (such as SV1 series), electric push rods and other actuators, to achieve high-precision position control.

• Typical application scenario: Paper pressure control for printing machinery and paper production lines (accuracy up to 100 ± 0.5kPa)

2、 Technical features

1. environmental adaptability

• Resistant to harsh industrial environments, stable operation in high temperature, vibration and other scenarios

• Support customized extensions to meet different user needs

2. Signal processing capability

• Wide range of measurement, adaptable to various sensor signals

• Integrated servo speed control motor and high-precision force sensor to improve control smoothness

3. system integration

• Compatible with other components of the EMG series (such as correction frame SMI-HE/SE, detection probe EVK2 series)

• Support DP communication protocol for easy integration with upper computer systems such as PLC

EMG control board SPCC1-7

SPCC1-7 Parameter Setting Guide

1、 Basic parameter settings

1. Signal type and range configuration

• Select the corresponding signal type on the touch screen interface based on the connected sensor type (temperature, pressure, speed, etc.).

• Adjust the range to match the sensor output, for example, a pressure sensor can be set to 0-10V or 4-20mA input.

2. Sampling rate and filtering settings

• Adjust the sampling frequency of the analog signal through the control panel (usually supporting a range of 10Hz-1kHz), and it is recommended to choose high-frequency sampling for high-precision scenarios.

• Enable digital filtering function to reduce signal noise interference, and set filtering coefficients.

2、 Collaborative parameters of executing agencies

1. Servo motor control

• Pulse input modeIf used in conjunction with servo valves (such as SV1 series), the Pr007 parameter needs to be set to 3 (single pulse+directional signal) or 1 (dual pulse mode).

• Motor parameter matchingSet the Pr008 parameter (number of pulses per revolution) based on the screw pitch, for example, when the pitch is 5mm, Pr008=5000 pulses per revolution.

2. Pressure and position control

• The paper pressure control needs to set a target value of 100 ± 0.5kPa and optimize the response speed through PID parameters (proportional, integral, derivative).

• The position correction system needs to be equipped with a limit switch signal (Pr504=0 to enable hardware limit).

3、 System Integration and Communication

1. DP protocol configuration

• Set DP communication parameters in PLC or upper computer, including station address, baud rate (default 187.5kbps), and data refresh cycle.

2. Power and safety settings

• Confirm that the input voltage is 220V AC and the current does not exceed 150A to avoid overload.

• Enable temperature protection function (default threshold of 85 ℃) to prevent equipment damage in high-temperature environments.

4、 Debugging and Calibration

1. sensor calibration

• Input standard signals (such as pressure calibrators) through calibration tools, adjust zero and full-scale parameters to ensure measurement accuracy.

2. System linkage testing

• Simulate a correction scenario, observe the response speed and position accuracy of the actuator (such as ESZ25 electric cylinder), and fine tune the PID parameters to optimize the control effect.

Ningbo Bingsheng:

1. In Europe and America, customs declaration forms and original factory certificates can be provided
2.German company source procurement, enjoy local low prices, and effectively save procurement costs
3.Joining hands with excellent logistics service providers to ensure accurate delivery times and reduce cargo wear and tear
4.Strictly implement national warranty regulations and cooperate with suppliers to ensure the quality of goods
5.Professional service, trustworthy, high-quality employees,ERPFull process operation, refined management
6.Quick quotation, courteous cooperation, ensuring fast quotation speed,VIPbody

Ningbo Bingsheng

Yan Gong

EMG control board SPCC1-7