-
E-mail
gzzzc@zzccom.com
-
Phone
15323368276
-
Address
154 Heguang Road, Tianhe District, Guangzhou City, Guangdong Province
Product Categories
- Train MVB communication product series
- TSN Communication Product Series
- Vehicle mounted wireless communication product series
- Train Ethernet TRDP Communication Product Series
- Train HDLC Communication Product Series
- Vehicle mounted PIS system product series
- Industrial Internet communication product series
- Industrial Ethernet Switch Series
Guangzhou Zhongzhicheng Information Technology Co., Ltd
Dual redundant Ethernet TSN-LPT module
NegotiableUpdate on 12/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The D114-TSNCore-PP-100A module is an Ethernet TSN module to LPT parallel interface series protocol conversion module produced by Guangzhou Zhongzhi Cheng Information Technology Co., Ltd. Ethernet defaults to full duplex 100Mbps. The LPT parallel port microcontroller uses a universal SDRAM interface. Ethernet port 0 serves as the TRDP0 interface and is connected to the train network 0. Ethernet port 1 serves as the TRDP1 interface and is connected to train network 1.
Product Details
uElectromagnetic compatibility meets《EN 50121-3-2：2006》The regulations;
uEthernet meets the requirements《IEC61375-2-3：2015》And《IEC61375-3-4：2014》Standard;
1. Product appearance
Product physical image
2. Electrical parameters
2.1 static parameters
Unless otherwise specified, the parameters listed in the table refer to the values at Tamb=25 ℃.
2.2 Mechanical dimensions
If users need to install D114-TSNCore-PP-100A, they can refer to
Figure 2.1D114-TSNCore-PP-100AModule top view and mechanical dimensions (unit: mm)
The appearance mechanical dimensions (expressed in metric units) provided in Figure 2.1 specify the length, width, height, and some mechanical structures of the product. If the user needs to make the D114-TSNCore-PP-100A motherboard, the pins used by the user are two pairs of standard 2.54mm pitch 30PIN round hole pins (pin diameter 0.7mm), distributed on both sides of the board as shown in Figure 2.1.
Figure 2.2 D114-TSNCore-PP-100AP Module View and Mechanical Dimensions (Unit: mm)
2.3 temperaturespecialsex
2.4 Pin description
Table 2.3D114-TSNCore-PP-100AModule pin name
2.5 baseplateM12Ethernet interface reference
Ethernet adopts“D”Type codedM12Connector,M12The connector has a metal shielding shell. The device end adopts a hole type connector,M12The definition of connector points is as follows:
Figure 2.4 Definition of Ethernet interface pins
1. Product features
u2roadcompulsory100M Full duplex Ethernet interface,2KVElectromagnetic isolation, default configuration isMDIpattern;
u2 routesM12Ethernet interface is used for configuration and real-time communication, and can form redundant interfaces;
u2 routesM12All interfaces are supportedIEEE 802.1 TSNSupport hardware timestamps to ensure accurate clock synchronization;
uhundred megabitsEthernet adopts“D”Type codedM12connector,；The Ethernet working mode can be selected asTCP ServerTheTCP ClientTheUDPandUDPMulticast, working port, targetIPBoth ports can be set;
uThe Ethernet application layer protocol complies withIEC61375-2-3andIEC61375-3-4Request, supportTRDPagreement;
uEthernetThe agreement complies withIEC61375-2-3andIEC61375-3-4Request, supportTRDPagreement; supportIEEE802.1 (including802.1AS-RevThe802.1QbvThe802.1QbuThe802.1CB)；
uEthernet comes with an isolation transformer that can withstand voltage and isolation2500V；
uEthernet supports static or dynamicIPobtain;
uMACThe address is globally unique,Or configurable；
uThe main power supply adopts3.3VPower supply;
uOperating Temperature-40℃～+85℃
ustorageTemperature:-40℃～+85℃
uMaximum relative humidity:90%
