Dual channel ultrasonic pulse generator and receiver

Dual channel ultrasonic pulse generator and receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/ReceiverThe series is a computer-controlled ultrasound pulse transmitter and receiver with single and dual channel options, featuring two independent channels. Users can choose between single or dual channels, and can combine different bandwidths of the two channels. Ultrasonic pulse transmitter receiverDPR500By adopting a remote pulse preamplifier structure, the loss caused by cable length between the probe and transmitter can be greatly reduced. Widely used in various fields such as ultrasonic microscopy, ultrasonic flaw detection, ultrasonic thickness measurement, probe characteristic measurement, material characteristic measurement, etc.

Dual channel ultrasonic pulse generator and receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/Receiversummary:

DPR500The ultrasonic high-voltage pulse transmitter and receiver is a dual channel modular instrument that integrates two complete pulse transmitter and receiver devices into one. The effective bandwidth of the receiver module has three specifications:50 MHThe300 MHzThe500 MHzAt the same timeDPR500You can also choose single channel mode.DPR500The functions include adjustable damping, gain, pulse amplitude, pulse energy, pulse repetition rate, high pass filter, low-pass filter, reflection or pass mode selection (based on pulse generator selection), and trigger source for the pulse generator. Fast response receiver and pulse generator circuit * shields electromagnetic noise and interference, ensuring high signal-to-noise ratio.DPR500Including one based onWindowsThe software control program. Can store and retrieve an unlimited number of instrument settings.Windows 98/95andNT .dll’s， andLabVIEW .viThe driver program can be used to develop customized software.DPR500By using a remote pulse generator, this method can bring the pulse generator closer to the probe. By shortening the length of the cable between the pulse transmitter and the probe, various interferences can be minimized. Multiple interchangeable remote pulse generators can adapt to probes with different frequencies and energy requirements. Application areas include acoustic microscopes, thin material or coating thickness gauges, computer-controlled imaging and measurement systems, material analysis and characterization, and probe evaluation.

Multi channel ultrasonic pulse generator and receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/ReceiverFeatures:

Two independent channels, which can be optionally selected as single or dual channels;

50MHzThe300MHzThe500MHzBandwidth options are available, with any combination of channels;

Remote pulse transmitter;

72/80dBGain low noise receiver;

Pulse echo mode（Pulse-Echo）Penetration mode(Through Transmission)；

Relevant applications can be developed independently through computers;

Rear view of DPR500-50Mhz-500Mhz model.

Two channel ultrasonic pulse generator receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/ReceiverrThe receiverReceiver：

receiverDPR500You can configure any one or a combination of two receivers as follows:

Two channel ultrasonic pulse generator and receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/ReceiverofPulse transmitterPulser：

Multi channel ultrasonic pulse generator and receiver/High frequency ultrasonic pulse transceiver/Ultrasonic pulse transmitter receiverJSR DPR500 Pulser/ReceiverHost parameters: