-
E-mail
hfchengchi@163.com
-
Phone
13866126226
-
Address
No. 17, Jun'er Middle Road, Lujiang, Hefei City, Anhui Province
Product Categories
Lujiang County Chengchi Industrial Furnace Factory
Drying oven dedicated fan
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Drying oven dedicated fan is a model designed specifically for drying equipment, drying ovens, drying ovens, hot air circulation ovens, food ovens, and industrial ovens. It is a replacement product for the fan used in drying equipment, and its efficiency is 10% higher than that of centrifugal fans. The dedicated style of the drying oven uses a fan circulation air supply method, with uniform and efficient air circulation. The air source is driven by a circulating air supply motor (using a contactless switch) to drive the wind turbine through a heater, and then the hot air is sent out through an air duct to the interior of the oven. The used air is then sucked into the air duct to become the air source for further circulation and heating. Ensure indoor temperature uniformity. When the temperature value swings due to the action of opening and closing the door, the air supply circulation system quickly resumes operation until it reaches the set temperature value.
Product Details
Drying oven dedicated fan
The dedicated fan for drying oven is a model designed specifically for supporting drying equipment, drying oven, drying oven, hot air circulation oven, food oven, and industrial oven. It is a replacement product for the fan supporting drying equipment, and its efficiency is 10% higher than that of centrifugal fans.
The dedicated style of the drying oven uses a fan circulation air supply method, with uniform and efficient air circulation. The air source is driven by a circulating air supply motor (using a contactless switch) to drive the wind turbine through a heater, and then the hot air is sent out through an air duct to the interior of the oven. The used air is then sucked into the air duct to become the air source for further circulation and heating. Ensure indoor temperature uniformity. When the temperature value swings due to the action of opening and closing the door, the air supply circulation system quickly resumes operation until it reaches the set temperature value.
The dedicated fan for the drying oven (excluding the motor) can operate continuously at temperatures below 130 ℃. Before operating the fan, all components should be checked for damage and looseness. The fan should have good grounding and the direction of operation should comply with the rotation mark. If the fan produces special noise, replace the bearings.
Maintenance instructions for the dedicated fan of the drying oven: 1. After the fan is turned on, it rotates counterclockwise. 2. The reason for the vibration or noise generated by the fan is the wear of the fan blades, the misalignment of the dynamic balance, and the need to replace the fan blades; The transmission shaft or bearing (Z205) is worn, replace the shaft or bearing; The coupling and elastic ring are worn, replace the coupling or elastic ring; If the motor end cover is loose or the bearing is worn, replace the end cover or bearing.
