DZW series electric actuator

NegotiableUpdate on 12/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DZW series electric actuators, our company's SD actuator models include AS-25/BS-60/B+RS160/B+RS250/B+RS400/B+RS600/B+RS800/B+RS1000/and other torque electric actuators.

Product Details

　　DZW series electric actuatorInstructions for use:

1. The non-invasive DZW valve electric device should be transported, stored, installed, debugged, operated, and maintained strictly in accordance with the requirements of this manual to avoid malfunctions and damage;

2. Non professionals are not allowed to install, debug, operate, or repair valve electric temporary equipment at will;

3. When installing, a lifting hook or cable should be used to cover the motor and wiring to lift the door electric device. It is not allowed to tie the cable to the handwheel, switch handle, or exposed cable to lift or move the valve electric device;

4. When the valve electric device is not installed and in use, it should be stored indoors in a dry place. When installing on pipelines, it is recommended to eliminate vibration if the amplitude of the aromatic pipeline is too large.

Operation panel:

Everyone, turn on and turn on the indicator lights

　　1. DZW series electric actuator status selection knob:

a. LOCAL: Local control state, when in local control, rotate to this position;

b. SET: When browsing and setting parameters, turn to this position;

c、REMOTE， When in remote control mode, rotate to that position. The status selection knob can be mechanically locked in any position to prevent accidental operation by others.

2. Button:

ESCVOPEN: Set status to return to the previous layer/Run status to execute the open command;

OKMSTOP: Set the status to confirm/run status to execute the stop command;

NEXTV/CLOSE: Setting status indicates entering the next layer/Running status indicates executing the shutdown command.