DY66 Wireless Bluetooth Vibration Temperature Sensor

DY66 Wireless Bluetooth Vibration Temperature Sensor

Long term and real-time monitoring of vertical and horizontal vibration and temperature of rotating equipment can be carried out, and data can be transmitted to smartphones. Through the analysis center, common faults such as imbalance, loose structure, and misalignment of rotating mechanical equipment can be accurately determined. And built-in national standardThe state recognition of GB/T 6075.3-2001 (vibration intensity) can analyze, predict, and actively upload equipment status.

1. scope of application

Aerovibration TX9L133-1 CollectorMainly designed for vibration detection and control in industrial, commercial, and general buildings. Suitable for various large and medium-sized rotating machinery and sports equipment Application sites for direct measurement of vibration safety and temperature rise safety, such as fans, water pumps, reducers, bearing seats, rolling friction bodies, etc.

The integrated motor data collector is a small integrated packaged sensing device with "vibration+temperature+The new device of "wireless transmission" adopts micro mechanical processing technology imported from the United States to integrate sensors. The vibration electrical signal is transmitted through bandpass filters, converters, amplifiers, and true effective values（RMS）The converter outputs the electrical signal to the high-performance data transmission module for storage and analysis in the upper layer system.

DY66 Wireless Bluetooth Vibration Temperature Sensor

Product Introduction

1.1 Introduction
The DY66 wireless vibration sensor (hereinafter referred to as the sensor) adopts Bluetooth wireless communication method, which can directly communicate with Apple, Android series mobile phones and tablets. It is simple and convenient to use, greatly saving manpower and material resources consumed in testing due to repeated deployment of wired data acquisition equipment. It is widely used in vibration data acquisition and industrial equipment point inspection.
The sensor is equipped with a piezoelectric accelerometer, which has a compact structure and small size. It consists of a power module, a data acquisition and processing module, and a wireless transceiver module, and is packaged in a dust-proof and waterproof shell. The sampling rate acceleration of the sensor is 12.8KHz, and the analysis bandwidth can reach 5KHz. It can perform envelope analysis and effectively determine bearing faults.
The data collected by sensors can be wirelessly transmitted in real-time to mobile phones and PADs, ensuring the timeliness and accuracy of data collection. The air transmission rate of the sensor can reach 250Kbps, and the effective outdoor communication distance can reach 10 meters. The sensor is equipped with a rechargeable lithium battery and designed with specialized power management software and hardware. It has a standby power consumption of 50uA and a working power consumption of 25mA, and can be used continuously for more than 24 hours.
1.2 Function and Features
The sensor is equipped with a built-in uniaxial piezoelectric accelerometer, which uses a hardware integration circuit to measure the total value and waveform of acceleration, velocity, and displacement. The bottom is also integrated with an infrared temperature sensor, which can measure the surface temperature of the device.
Main Features
Ø Bluetooth 4.0 Ble transmission, can directly connect to Apple and Android series phones and tablets for inspection work
Wireless data collection to avoid wiring construction
Ø Total value and waveform of measurable acceleration, velocity, displacement, and temperature signals
Ø Sampling frequency up to 12.8KHz, capable of analyzing bearing faults
Ø Built in rechargeable lithium battery, capable of continuous use for 30 hours
Non contact infrared temperature measurement
Ø H-shaped magnetic suction seat, reliable suction of flat and curved surfaces