DIN51130 Floor Anti slip Tester (Slope Method)

Product Name:DIN51130 Floor Anti slip Tester (Slope Method)
Product model: XK-3906
Product Description:
DIN51130 Floor Anti slip Tester (Slope Method)Used for testing the anti slip performance of floor surfaces; The equipment consists of a 600mm wide and 2000mm long flat plate that is not easily twisted as a simulated inclined platform, with a longitudinal slope adjustable between 0 ° and 45 °. The servo motor drives the platform to rotate at a specified angular velocity through a screw device, and gradually changes the angle by 0.50 under the control of the tester; Apply lubricant to the test surface and the tread of the test shoe before the experiment. The tester wearing the installation protection device should maintain an upright posture and walk back and forth on the test platform in the direction of observation with a step size of half a shoe each time. The test platform should start tilting at a speed of 10/S from the horizontal position, and stop tilting when the tilt angle reaches. Record the tilt angle value and repeat 3 times to ensure the angle value. alsoEscalators and moving sidewalks have steps and tread surfaces, as well as comb support plates.
Execution standards:
DIN51130:2014-02《Testing of floor coverings-Determination of the anti-slip properties-Workrooms and fields of activities with slip danger,walking method-Ramp test》、 Appendix KZ of the "Elevator Type Test Rules" (2012) - Type Test for Slip Resistance Performance of Stairs and Treads, Comb Support Plates, and Floor Plates Surface
Relevant standards for the entire process of equipment manufacturing:
GB/T2611-2007 General Technical Requirements for Testing Machines
GB16754-1997 "Design Principles for Emergency Stop of Mechanical Safety"
GB/T5226.1-1996 General Technical Conditions for Industrial Machinery and Electrical Equipment
GB16899-2011 Safety Code for Manufacturing and Installation of Escalators and Moving Walkways;
Specification parameters:
Test result accuracy: ± 0.05 °;
The maximum tilt angle of the workbench is 45 °;
Testing method: Simulate human automatic walking under natural actual working conditions, equipped with three standard test templates;
Test process: European standard DIN ISO5725-5; Testers monitor the entire process in real-time;
Standard sample: European standard DIN51130:2014;
Test shoes: comply with European standard DIN51130:2014;
Record: The control system records the entire testing process and automatically calculates and judges whether the test object meets the requirements of DIN51130;
Surface treatment: Shot blasting treatment grade 2.5+bottom anti rust paint+special grade resin quick drying topcoat;
Safety protection measures: Safety protection: The safety handrail is installed on the long side of the testing device to protect the tester from falling, in accordance with national standards (safety rope protection complies with GB6095:2009);
Power supply/power: 220V, 50/60Hz, 2.5KW;
Dimensions (L × W × H): 3060mm × 780mm × 3555mm;
Installation size: 4.0m × 1.8m (ordinary cement or tiled floor);
Equipment weight: approximately 300Kg
Machine structure: composed of a tilting platform, bracket, human safety protection device, test shoes, and control cabinet.
1. Tilted platform: The tilted platform frame is welded with a steel frame, making it easy to install the test plate. It is equipped with protective railings, and the rotating drive structure is controlled by servo motors and reducers. The surface treatment of the whole machine is sprayed with fast drying epoxy resin anti rust primer and advanced polyurethane topcoat.
2. Bracket: Made of welded steel square tubes, used to support inclined platforms and install safety belts.
3. Safety protection device: composed of personnel safety belts, helmets, knee pads, and guardrails, to prevent injuries caused by falls of testers.
4. Control cabinet: The system mainly consists of an operation panel and electrical control components. The operation panel is composed of a color touch screen and various instruments, mainly used to realize functions such as starting, stopping, data display, and adjustment of related data of the tester.