DF12 lighter pressure tester

Purpose and standards

1. This instrument is used forTest the pressure resistance performance of lighters and support pressure testing.

2. Lighter pressure testThe instrument follows the following standards:

uISO9994：2018《Lighter Safety Rules》;

uSNT0761.1-2011 "Inspection Regulations for Export Dangerous Goods Lighters";

uGB 25722-2010 "Safety and Quality of Lighters";

uAnd national standards and industry standards that are equivalent or equivalent to the above standards.

Technical Specifications

1. Suitable for lighter types: direct firing machine&Slanting machine&grinding wheel machine;

2. maximumSingle batch testing quantity:10 pieces;

3. Pressure value:500kpa~2Mpa；

4. Pressurization rate:10kpa/s~150kpa/s；

5. Gas source pressure:2Mpa；

6. Gas source pressure fluctuation:5%~8%；

7. Pressure value control accuracy:10pcs;

8. Pressure rate control accuracy:10kpa/s；

9. Equipment power supply:AC220/50（V/Hz）；

10. Overall dimensions(L×W×H)：700mm×650mm×590mm.

Features

1. Maximum support per experiment 10 samples;

2. Supports two working modes: detection mode and calibration mode;

3. Open hole samples in detection mode（Align the needle valve (3.06mm) and place it in the clamping unit,stuckStart inflating after opening the hole until fully inflated1500kPa， Automatically close the gas path and perform leak detection through a pressure gauge;

4. After 1 minute, record the internal pressure. If the pressure in one of the channels drops by more than 250 kPa/min, it is considered a leak. Move the clamping unit into the water tank and trigger the red status indicator light alarm to remind the tester to observe the leak point and record it;

5. In calibration mode, the road to be calibrated is connected to a standard barometer for calibrationbranchRoad pressure calibration;

6. adoptexplosion-proofGlass structure ensures safe visualization of the testing process;

7. Built in explosion-proof lighting system ensures clear observation of the test status even at night or in low light conditions;

8. Equipped with high-definition surveillance cameras to record the testing process and enable remote monitoring through the network;

9. Red one button emergency stop button, which can directly cut off power in case of accidents, ensuring the safety of test personnel;

10. The experimental control unit and experimental unit adopt a separate design for easy maintenance and upgrading;

11. The equipment is equipped with red and green status indicator lights to display real-time working status;

12. The instrument is equipped with an automatic exhaust function to ensure safe gas discharge inside the box;

13. Equipped with electric interlock function, the system automatically locks during the test to prevent accidental opening;

14. Support remote control start and stop, greatly improving the flexibility and efficiency of operation;

15. Support one click exportExcel test report, including data, results, and analysis reports;

16. The instrument must be operated with a computer and pre installed with professional operating software.