DCS System_i/O Interface Module _ ET 200S

The DCS System_i/O Interface Module - ET 200S and SIMATIC ET 200S are multifunctional and highly modular I/O systems with an IP20 protection level, allowing for precise customization for automation tasks.

The DCS system_i/O interface module_ET 200S with integrated CPU and PROFINET/PROFIBUS connection interface module has now been launched - available in standard design and secure design. The modular ET 200S can provide a wide range of modules, including power modules, digital or analog input and output modules, technical modules, an IO Link master station, as well as motor starters, frequency converters, and a starting interface. Due to its sturdy structure, the ET 200S can also be used under high mechanical pressure conditions. Under space constraints, a compact block I/O ET 200S COMPACT can be expanded. The ET 200S also has a SIPLUS version, which has a larger applicable temperature range.

Application field

The rich modules make the ET 200S an ideal I/O system for almost all industries, and particularly suitable for situations that require module design and rich functionality. The ET 200S has strong internal data transmission capability and synchronous working mode, and is also very suitable for time critical applications.

advantage

Integrated CPU functionality

Greatly saves wiring

Less space requirements in the control cabinet

Featuring a compact version

modular design

Complete module series

Design for integrated security

Integrated with specific channel diagnostic functions

Can be used in hazardous locations (Class 2 areas)

As a safety device, it provides frequency converters and motor starters

Option loading and unloading simplify configuration work

Modules can be replaced during operation (hot swappable)

Design and functionality

Due to the isolation between mechanical and electronic devices, permanent wiring can be carried out, meaning that the site can be pre wired before installation or start-up. Therefore, the inspection of pre wiring does not require electronic modules, which prevents damage to sensitive components. And thus reduced the startup time. It is also possible to quickly replace modules in the event of a malfunction without the need for time-consuming rewiring. According to the interface module situation, 63 I/O modules can be inserted. Based on the interface module situation, the width of ET 200S is 2m.

By deploying through insulation, quick connection even provides more benefits for installing electronic and power modules. With this new method, wires with cross-sectional areas ranging from 0.34 mm ² to 1.5 mm ² can be connected without the need for stripping or crimping.