- Phone
-
Address
No. 66, Yousong Village, Gongye Road, Longhua Street, Longhua District, Shenzhen City
Product Categories
Shenzhen MiEn Technology Co., Ltd
Cybertek DP6020A High Frequency Low Voltage Differential Probe
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Cybertek DP6020A high-frequency and low-voltage differential probes $r $nDP6020A and DP6040A are low-voltage differential probes with floating ground measurement function. The measured voltages are #177; 20V (DC+Pk) and #177; 40V(DC+Pk), Its bandwidth can reach up to 800MHz, providing 10:1 and 20:1 attenuation settings, with input impedances of 200K Ω and 400K Ω, as well as low input capacitors of 1pF and 0.5pF, which can greatly reduce circuit load; Equipped with overvoltage alarm function
Product Details
Know how to useCybertek DP6020AHigh frequency and low voltage differential probe
bandwidth(-3dB) 800MHz
Rise time ≤437ps
Product Overview:
DP6020AandDP6040AThe probe is a low-voltage differential probe with floating measurement function. The measured voltages are±20V(DC+Pk)and±40V(DC+Pk),Its bandwidth can reach up to800MHz, provide10:1and20:1The attenuation setting has200KΩand400KΩThe input impedance, and1pFand0.5pFLow input capacitance can greatly reduce circuit load; Equipped with overvoltage alarm function, compatible with any device with50 Ω BNCThe input oscilloscope can be used through an oscilloscope or a computerUSBPort power supply. Widely used in various applications, it can provide excellent universal differential signal measurement for today's high-speed power measurement, vehicle bus measurement, and digital system design.
Product Parameters:
type number |
DP6020A |
|
bandwidth(-3dB) |
800MHz(reference diagram1Frequency response curve) |
|
rise time |
≤437ps |
|
precision(Reading of%) |
±2% |
|
Attenuation ratio |
10:1 |
|
Maximum differential measurement voltage(DC + Peak AC) |
±20V |
|
Maximum common mode input voltage |
±30V |
|
Maximum rated input voltage (each end to ground) |
±40V |
|
input impedance |
Single end to ground |
100kΩ |
Two input terminals |
200kΩ |
|
input capacitance |
Single end to ground |
＜2pF |
Two input terminals |
＜1pF |
|
Output voltage swing |
±2V(drive50ΩOscilloscope input) |
|
Bias (typical value) |
±5mV |
|
Bias adjustment range (typical value) |
±20mV |
|
CMRR |
50Hz/60Hz |
＞80dB |
500MHz |
＞15dB |
|
noise(Vrms) |
＜4.5mV |
|
Overload indication voltage threshold |
≥20V |
|
delay time |
Probe host |
6ns |
BNCline(1m) |
5ns |
|
Overload indicator light |
When overloaded, the red indicator light is on |
|
Terminal load requirements |
50Ω |
|
electricity source |
USB 5V/2Aadapter |
|
Know how to useCybertek DP6020AHigh frequency and low voltage differential probe
Similar Product Recommend
