- Phone
-
Address
No. 66, Yousong Village, Gongye Road, Longhua Street, Longhua District, Shenzhen City
Product Categories
Shenzhen MiEn Technology Co., Ltd
Cybertek DP6020 High Frequency Low Voltage Differential Probe
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Cybertek DP6020 high-frequency and low-voltage differential probe $r $nDP6020 probe is a low-voltage differential probe with floating measurement function. Measure voltage #177; 20V(DC+Pk), Its bandwidth can reach up to 200MHz, providing a 10:1 attenuation setting, with an input impedance of 1 M Ω and a low input capacitance of 3.5 pF, which can greatly reduce circuit load. It has overvoltage alarm function, is compatible with any oscilloscope with 50 Ω BNC input, and can be powered through the oscilloscope or USB port on the computer.
Product Details
Know how to useCybertek DP6020High frequency and low voltage differential probe
precision(Reading of%)±1%
Bandwidth200MHz
Product Overview:
DP6020The probe is a low-voltage differential probe with floating measurement function. measure voltage±20V(DC+Pk),Its bandwidth can reach up to200MHz, provide10:1The attenuation setting has1 MΩThe input impedance, and3.5 pFThe low input capacitance canto a great extentReduce circuit load on the ground, with overvoltage alarm function, compatible with any device with50 Ω BNCThe input oscilloscope can be used through an oscilloscope or a computerUSBPort power supply. Widely used in various applications, it can provide excellent universal differential signal measurement for today's high-speed power measurement, vehicle bus measurement, and digital system design.
Product Parameters:
bandwidth(-3dB) |
200MHz(reference diagram1Frequency response curve) |
|
rise time |
≤1.75ns |
|
precision(Reading of%) |
±1% |
|
Attenuation ratio |
10:1 |
|
Maximum differential measurement voltage(DC + Peak AC) |
±20V |
|
Maximum common mode input voltage |
±60V |
|
Maximum rated input voltage (each end to ground) |
±60V |
|
input impedance |
Single end to ground |
500kΩ |
Two input terminals |
1MΩ |
|
input capacitance |
Single end to ground |
＜7pF |
Two input terminals |
＜3.5pF |
|
Output voltage swing |
±2V(drive50ΩOscilloscope input) |
|
Bias (typical value) |
±2mV |
|
Bias adjustment range (typical value) |
±95mV |
|
CMRR |
50Hz/60Hz |
＞80dB |
10MHz |
＞50dB |
|
noise(Vrms) |
6mV |
|
Overload indication voltage threshold |
≥20V |
|
delay time |
Probe host |
11ns |
BNCline(1m) |
5ns |
|
Overload indicator light |
When overloaded, the red indicator light is on |
|
Terminal load requirements |
50Ω |
|
electricity source |
USB 5V/1Aadapter |
|
Know how to useCybertek DP6020High frequency and low voltage differential probe
Similar Product Recommend
