Customized fixture for light stability test of artificial intraocular lens

SOLAR-8 Customized Fixture for Light Stability Test of Artificial Lens

Fixture features:

The whole is made of aluminum alloy and stainless steel, and each fixture can hold 5 samples.

The maximum capacity of the test tube is 6mL, and it is made of materials with hydrolysis grade I that comply with the regulations of the European Pharmacopoeia and the United States Pharmacopoeia.

Equipped with a detachable half cover, it can prevent the test tube plug from aging due to prolonged exposure to light.

The bottom of the test tube is equipped with a rubber pad to ensure that the test tube does not shake.

The bottom flat design is conducive to heat dissipation and can be placed on a water-cooled board or stacked for use.

Configuration list:

1 platform base

1 blackout cover

2 stainless steel hand screws

50 test tubes

20 flat silicone plugs

Two test tube brushes

test tube rack

2 graduated droppers

Easy operation guide:

---Put 2mL of physiological saline into the test tube, add the crystal, install the test tube stopper, and fix the test tube in the fixture.

---Raise the fixture vertically and gently shake it, then slowly lay it down on the testing platform to ensure that the crystal is lying flat near the bottom of the test tube.

---Illuminate under a xenon lamp equipped with appropriate filters.

Customized fixture for light stability test of artificial intraocular lensSOLAR-8A

Fixture features:

The whole is made of aluminum alloy and stainless steel, and each fixture can hold 10 samples.

Made using 5mL test tubes and materials with hydrolysis grade I that comply with the regulations of the European Pharmacopoeia and the United States Pharmacopoeia.

Equipped with a detachable half cover, it can prevent the test tube plug from aging due to prolonged exposure to light.

The bottom of the test tube is equipped with an adjustable stainless steel nut to ensure that the test tube does not shake.

The bottom flat design is conducive to heat dissipation and can be placed on a water-cooled board or stacked for use.

Comes with a detachable full blackout cover, allowing the fixture to be used for control group experiments.

Configuration list:

1 platform base

1 full blackout cover

1 semi opaque cover

Stainless steel hand screw 4 pieces

50 sets of test tubes and test tube plugs

Two test tube brushes

One hexagonal screwdriver with handle

test tube rack

2 graduated droppers

20 spare rubber gaskets

Easy operation guide:

---Place 2mL of physiological saline in a test tube with a total capacity of approximately 5mL, add crystals, insert the test tube stopper, and secure the test tube in the fixture.

---Raise the fixture vertically and gently shake it, then slowly lay it down on the testing platform to ensure that the crystal is lying flat near the bottom of the test tube.

---Illuminate under a xenon lamp equipped with appropriate filters.