Controllable vacuum drying oven

The digital vacuum controlled vacuum drying oven is widely used in research and application fields such as biochemistry, chemical pharmaceuticals, medical and health care, agricultural research, environmental protection, etc. It is used for powder drying, baking, and disinfection and sterilization of various glass containers.

　　Digital display vacuum degree controllable vacuum drying ovenProduct Parameters:

Product model: DZF-6020L

Power supply voltage: AC220V 50HZ

Temperature control range: RT+10-250 ℃

Constant temperature fluctuation: ± 1 ℃

Temperature resolution: 0.1 ℃

Vacuum degree: ≤ 133Pa

Output power: 450W

Studio size: 300 * 300 * 275

Dimensions: 590 * 470 * 1370

Internal Alchemy Material: Stainless Steel

Load carrier (standard): 1 piece

Timing range: 1-9999 minutes

Advantages of vacuum drying technology:

The vacuum environment greatly reduces the boiling point of the liquid that needs to be expelled, so vacuum drying can be easily applied to thermosensitive substances;

For samples that are not easily dried, such as powder or granular samples, vacuum drying can effectively shorten the drying time;

Various complex mechanical components or other porous samples are cleaned and dried using vacuum drying method, leaving no participating substances after drying;

Safer to use - eliminates the possibility of oxides exploding when exposed to heat under vacuum or inert conditions;

Compared with ordinary drying relying on air circulation, powdered samples will not be blown or moved by flowing air.

　　Digital display vacuum degree controllable vacuum drying ovenProduct Features

Vacuum degree control

The digital vacuum gauge automatically controls the vacuum degree, providing you with more accurate and effective vacuum degree control. The vacuum degree can be easily controlled through the panel, and the vacuum degree can be easily controlled between any two points or areas within the range of 1.0 × 10 to 1.0 × 105 (Pa) -1, with a control accuracy of ± 1%. The vacuum gauge adopts a resistive silicon tube pressure sensor to ensure stable pressure values and provide you with more accurate and effective vacuum degree control.

The heating element is located on the partition inside the box, which reduces the heating time by 50% compared to traditional vacuum drying boxes.

Aluminum shelves made by special stamping processes have high temperature resistance and fast thermal conductivity. Minimize heat loss to the greatest extent possible.

The rectangular studio maximizes the effective volume, and the microcomputer temperature controller ensures reliable temperature control.

Tempered, double-layer glass door for observing objects inside the studio, clear at a glance, capable of filling the interior with inert gas.

The tightness of the box door closure can be adjusted by the user, and the silicone rubber door sealing ring formed as a whole ensures high vacuum inside the box.

The studio is made of stainless steel plates, and the outer shell of the box is made of high-quality cold-rolled steel plates, with surface electrostatic spraying.

Storage, heating, testing, and drying are all carried out in an environment without oxygen or filled with inert gas, which will not cause oxidation.